packing gland发音

意思翻译

填函料

相似词语短语

gland packing───压盖填料

gland───密封压盖；n.腺

packing───n.包装；填充物；v.包装；装满；压紧（pack的ing形式）

packing fraction───聚集率；[核]敛集率

customary packing───[包装]习惯包装

packing label───包装标签

packing date───包装日期

packing density───组装密度，存储密度，记录密度；[电子]组装密度；[计]记录密度；[计]存储密度

insufficiently packing───包装不足

双语使用场景

packing gland is used to maintain compression on the packing rings.───填料压盖用来压紧填料环。

The stem and packing gland are also stainless steel for corrosion protection.───阀杆和填料密封装置同样采用不锈钢，具有耐腐蚀性能。

Check if the clamp-sealing torque of packing gland accords with the standard specification.───检验填函盖的钳紧扭矩是否符合标准规格。

The smooth length of brass or steel rod that moves up and down through the stuffing box or packing gland of a sucker rod pump.───用于有杆泵的经盘根盒或盘根压盖上下移动的一根光滑的黄铜杆或钢杆。

Rugged construction provides years of reliable service. A two piece packing gland prevents cocking and stem damage.───坚固耐用的结构确保多年稳定可靠的使用。两件式填料压盖防止压盖翘起和阀杆损坏。

The packing gland is stainless steel for corrosion resistance. Packing gland bolts are easily accessible for adjustments.───填料密封装置采用耐腐蚀的不锈钢材质。填料密封装置的螺栓很容易被操作，以便于调节。

Gland locking device prevents loosening of the packing gland, reducing leak potential.───压盖闭锁配置防止压盖松动，降低泄露可能性；

NOTE: If minor leakage occurs, remove lock screw, lock washer and cap and lightly tighten packing gland nut.───注：如果出现少量的泄漏，则拆卸锁紧螺丝，然后锁住垫圈和阀盖，然后轻轻紧固填料压紧螺母。

the installation of too much filler, so that packing gland packing in the above letter, resulting in displacement, abrasions stem.───填料安装太多，使填料压盖处在填料函上面，产生位移，擦伤阀杆。

英语使用场景

The stem and packing gland are also stainless steel for corrosion protection.

A two piece packing gland prevents cocking and stem damage.

Stem and Disc or Disc Holder are integral. No packing gland, packing only in these sizes.

NOTE: If minor leakage occurs, remove lock screw, lock washer and cap and lightly tighten packing gland nut.

Properly press the packing gland bit wear and replace it in case of too much wear.

Check the stuffing box, the packing gland should be flatted and tensioning torque should be proper.

Expeller seals packing include expeller , pressure - relief cover, sleeve, packing water sealing ring and packing gland, etc.

Tighten up the packing gland on the swivel.

No packing gland, packing only in these sizes.