apparent porosity发音

意思翻译

[陶瓷]显气孔率；虚表孔率

相似词语短语

apparent───adj.显然的；表面上的

porosity───n.有孔性，多孔性

readily apparent───显而易见

apparent power───视在[表观]功率；[电]视在功率；[电]表观功率

heirs apparent───法定继承人，有确定继承权的人

heir apparent───n.有确定继承权的人；法定继承人，有确定继承权的人

apparent to───明显；对…来说显而易见

startlingly apparent───惊人的明显

plainly apparent crossword───明显的纵横填字游戏

双语使用场景

the increase of sintering temperature, the apparent porosity of sample decreases, while bulk density, hardness and compressive strength increased.───烧结温度的升高，材料的显气孔率降低，而体积密度、硬度和抗压强度均增加。

apparent porosity and water absorption were the lowest, the bulk density and heat-resistant property were the highest after dipping for 4 times.───浸渍次数增加而优化，浸渍4次的显气孔率和吸水率最低，体积密度和热稳定性最高。

These products have very compact structure, low apparent porosity, high refractoriness, and excellent corrosion resistance.───该产品具有组织结构致密、显气孔率低，耐高温、耐侵蚀能力强等特点。

Ceramic tiles. Part 3 : determination of water absorption, apparent porosity, apparent relative density and bulk density.───瓷砖.第3部分：吸水率、外表孔隙率、外表相对密度和松密度的测量

Advanced technical ceramics - Ceramic composites - Physical properties - Determination of density and apparent porosity───高级技术陶瓷。陶瓷复合材料。物理特性。测量密度和表面孔隙度

Fine ceramics (advanced ceramics, advanced technical ceramics) -- Determination of density and apparent porosity───精细陶瓷（高级陶瓷、高技术陶瓷）密度和表观气孔率的测定

Standard Test Method for Water Absorption, Bulk Density, Apparent Porosity, and Apparent Specific Gravity of Fired Whiteware Products───焙烧卫生陶瓷制品的吸水率、松密度、表观多孔性与表观比重的试验方法

testing method for water absorption, bulk density, apparent specific gravity and apparent porosity of fired whiteware products───陶瓷吸水性、毛体积比重、表观比重、表观气孔率测定方法

Test method for the apparent porosity, water absorption bulk density and true porosity of dense shaped refractory products───致密定形耐火制品显气孔率、吸水率、体积密度和真气孔率试验方法

英语使用场景

Results showed that compared with porous SiC ceramics, the MOR of SiC-cordierite was improved significantly, and the TEC decreased remarkably, and the apparent porosity also decreased.

With the increase of sintering temperature, the apparent porosity of sample decreases, while bulk density, hardness and compressive strength increased.

These products have very compact structure , low apparent porosity , high refractoriness , and excellent corrosion resistance.

The apparent porosity and water absorption were the lowest, the bulk density and heat-resistant property were the highest after dipping for 4 times.

Traditional corhart has lots of holes. The silica fume is to fill these holes so as to increase the density, decrease the apparent porosity and increase the strength of corhart.

The low density drilling fluid has borehole excavation effect on compensated neutron porosity logging, and by this way apparent porosity is lower than the true value.

It is shown that the changes of is resulted from the changes of both apparent porosity and the distance between layers of gel-type montmorillonite in interparticle pores.