bond strength发音

意思翻译

粘合强度；[物化]键强度

相似词语短语

strength───n.力量；力气；兵力；长处

bond───vt.使结合；以…作保；vi.结合，团结在一起；n.(Bond)人名；(英、德、西、刚(金)、瑞典)邦德；n.债券；结合；约定；粘合剂；纽带

shear strength───切变强度

sapped strength───磨损强度

amide bond───酰胺结合

peptide bond───[生化]肽键

vulcan strength───瓦肯力量

regain strength───恢复体力

full strength───满员；全强度

双语使用场景

Bond strength of love, enough to smash all fetters.───爱情纽带的力量，足以粉碎一切羁绊。

And this turns out to have a bond strength of 435 kilojoules per mole.───这证明有每摩尔435焦的，的共价能。

Mg alloy; electroless plating; bond strength.───镁合金；化学镀；结合强度。

for maximum bond strength the surface should be thoroughly cleaned and dried.───为了能连接后能有最大的强度，物体表面应该彻底清洁并弄干。

If the temperature continued to rise, the bond strength decreased rapidly.───温度继续升高时，结合强度迅速下降。

In this study, the degradation of the bond strength between the steel rebar and concrete by the impressed cathodic current was investigated.───本研究系探讨外加阴极防蚀电流以钢筋与混凝土介面间的握裹强度之折减效应。

Wire Pull Testing (WPT) , or bond pull testing, is one of several available time-zero tests for wire bond strength and quality.───拉线测试（WPT），或称键合力度拉扯测试，是评价金线键合力度与质量的有效方法之一。

Mechanical evaluations of a widely adopted coating shear bond strength test standard were conducted via the finite element method.───本文采用有限单元法对一种普遍采用的涂层剪切结合强度测定标准进行了力学计算。

After testing, thermal aging volatility plastic viscosity, slows the permeability of the book, affecting the bond strength.───经老化试验测试，热稳定性差的胶粘度增高，会降低书的渗透性，影响粘结强度。

英语使用场景

The results show that the bond strength increases first, then decreases with increasing the MMT, which is in accordance with the change of content of the hydroxymethyl.

The bond strength between bone and titanium coatings was also measured by push-out test.

Good bond strength and high binding power , no environmental pollution with high temperature bonder, Good leak tightness for high temperature daub.

Finally, the bond strength of FRP bars to epoxy resin and cement grout is also studied.

The edge sealing structure improves the bond strength of the edge of the case frame and is beneficial to the construction and assembly of the case frame.

Hot corrosion dynamics and bond strength of the coatings with different structure and spraying process (APS and FWS) were compared.

Phenolic resin has excellent bond strength, water resistance, durability, acid-resistant and drug-resistant features, excellent performance, which is an excellent adhesive.

The bond strength is its cohesiveness of adhesives and adhesive and glued bodies adhesive force.

Finally, the simplified formulas for the bond strength and the simplified model for bond stress versus relative slip relationship are suggested based on the analysis of the test results.