deposition rate发音

意思翻译

沉积速率；沉积速度；沉淀速度；熔敷率

相似词语短语

deposition───n.沉积物；矿床；革职；[律]（在法庭上的）宣誓作证，证词

digesting deposition───消化沉积

vapor deposition───蒸镀；汽相淀积；汽相淀积，蒸镀

deposition definition───沉积定义

rate───n.(Rate)人名；(法、塞)拉特；n.比率，率；速度；价格；等级；vi.责骂；被评价；vt.认为；估价；责骂

deposition picture───沉积图象

deposition objections───供词异议

deposition examples───沉积实例

deposition transcript───宣誓书

双语使用场景

The deposition rate was decreased with increased of the temperature.───沉积速率随温度的增加而减少；

Influences of Oxygen Partial Pressure and Deposition Rate on Residual Stress of YSZ Thin Films.───氧分压和沉积速率对YSZ薄膜残余应力的影响。

effect is very significant at low substrate temperature or high deposition rate.───的影响在较低的基片温度或是较高的沉积速率时更加显著。

The deposition rate, microhardness, corrosion rate of low temperature iron plating layer at different temperatures are investigated.───研究了在不同温度下获得的低温镀铁层的沉积速率、显微硬度、腐蚀速率等性能。

Thus, using this CVD configuration a relatively high deposition rate can be achieved while obtaining desired levels of coating uniformity.───因此，使用所述CVD配置可达到相对较高的沉积速率，同时获得所要程度的涂层均一性。

In magnetron sputtering, higher deposition rate could be helpful to deposit metal films of higher purity within shorter deposition time.───磁控溅射中高沉积速率有利于获得高纯度薄膜，节省镀膜时间；

The microhardness can be improved at lower temperature, but deposition rate and corrosion resistance will be reduced.───温度降低时可提高镀层硬度，但沉积速率和耐蚀性均下降；

The deposition rate and coating thickness were determined, and the effects were compared with those of electroplating.───对镀速和镀层厚度进行了测定，并与电镀进行了效果比较。

Hot cathode glow discharge plasma chemical vapor deposition is a new method to deposit high-quality diamond films with high deposition rate.───建立了快速沉积高品质金刚石膜的热阴极辉光放电等离子体化学气相沉积新方法。

英语使用场景

Blowing argon decreases deposition rate at appropriate range of argon flowrate.

Furthermore, the deposition rate increases per unit of welding current by decreasing wire diameter, and adjustment of the penetration depth is enabled by alternating current wave form and polarity.

MPE technique shows remarkable advantages such as single precursor, wide choices of source materials, high deposition rate, and no subsequent annealing.

The deposition rate and photosensitivity increases while the Xc decreases with the increase of silane concentration.

The deposition rate decreases with increasing duty ratio but increases with increasing frequency.

Increase of contents of potassium sodium tartrate, additive A and promoter M would improve soln. stability while reduce deposition rate. Temperature, stirring and load capacity all have effects on ...

This paper discusses how to use bottom shearing stress method to determine the resuspension rate and deposition rate, and how to select and calculate the correlative parameter.

The relationship between the flow rate of Freon ( CCI 2 F 2 ) and deposition rate and efficiency is obtained.

The deposition rate, morphologies, breakdown voltage and refractive index were studied.