continuous caster发音

意思翻译

连铸机，连续铸造机

相似词语短语

caster───n.铸工；脚轮；投手；调味瓶；n.(Caster)人名；(罗、法、英)卡斯特

continuous───adj.连续的，持续的；继续的；连绵不断的

caster wheel───脚轮

perfect continuous───现在完成进行时

present continuous───现在进行式

continuous function───[数]连续函数；连续功能

continuous flow───[流]连续流；持续气流

continuous work───[劳经]连续工作；连续工作，连续运转

caster oil───蓖麻油，蓖麻

双语使用场景

This paper gave some remarks to the design and operational parameters of billet continuous caster mould.───本文对连铸小方坯结晶器的设计和操作参数作了一些说明。

The movement of slabs in reheating furnace from two-strand thin slab continuous caster operations is discussed.───讨论了两流薄板坯连铸连轧作业时铸坯在加热炉内的运动情况。

calculation, control and realization method of load balance between inverters on the straightener of continuous caster are presented.───连铸拉矫机变频器装置之间负载平衡的计算、控制和实现方法。

The ASP continuous caster used in AISC was all equipped with VAI SMART sector section as well as dynamic soft reduction techniques.───鞍钢ASP铸机均采用奥钢联SMART扇形段并配有动态轻压下技术。

Then, operation practices at continuous caster to improve inclusion removal and steel cleanliness are reviewed.───然后介绍了改善夹杂物去除和提高钢洁净度的铸机操作。

The cold state characteristics of spray nozzles in secondary cooling zone of slab continuous caster were investigated.───对连铸二冷区喷嘴的冷态特性进行了研究。

The mould is the core component of continuous caster for primary cooling and initial shell forming of liquid steel.───结晶器是连铸机的核心部件，完成将钢液初步凝固成型的任务。

The increase of casting speed of continuous caster could make the time shorter for the soaking of slabs.───提高连铸机的拉坯速度可以使铸坯均热所需的时间明显缩短。

Improvement on welding process of continuous caster chain bracket for Tonghua Steel Co.───通钢连铸机链条托架焊接工艺的改进。

英语使用场景

The designing and calculating method of the continuous curve chart is deduced; all types of modern continuous caster curve are analyzed by using the continuous casting curve method.

Feasibility of - line displacement of position sensor in - shaped segment of CSP sheet continuous caster is discussed.

This paper introduces the operation principle of the author developed equipment for measuring roll gap and ellipticity of the guide roller in continuous caster.

The present paper introduces the process route of LD converter Ar blowing and wire feeding slab continuous caster TMCP for producing Q345C low alloy and high strength structural steel plate.