cross feed发音

意思翻译

交叉馈电

相似词语短语

feed───v.喂养；进食；为……提供充足的食物；施肥；给（火）添加燃料；为（机器）提供原料或动力；为（某人）提供（信息、主意等）；为（水体）供水；（球类运动用语）喂（球），传球给（队友）；使（缓慢平稳地）移动；使穿过（有限的空间）；增进；放牧；抚养（家庭等）；（非正式）满足（毒瘾）；n.饲料；饲养；（尤指给动物或婴儿）喂食；进食；（动物或婴儿的）一餐；（机器的）进料装置；（机器、设备的）原料供给；（卫星或网络）转播；（计算机的）订阅源

feed stock feed───饲料饲料

feed like───喂得像

cross───vi.交叉；杂交；横过；n.交叉，十字；十字架，十字形物；adj.交叉的，相反的；乖戾的；生气的；vt.杂交；渡过；使相交

parasitically feed───寄生性饲料

feed him───喂他

feed to───向…提供食物；供应给

feed at───馈送

daphnia feed───水蚤饲料

双语使用场景

During a facing operation, feed is provided by the cross slide, whereas the depth of cut is controlled by the carriage or compound rest.───在端面车削操作中，进给由横向滑板提供，而切削深度则通过大拖板或复式刀架控制。

This article describes the vertical and cross feed mechanism for both metric and inch system. It is able to perfom automatic, rapid travelling and micro feed.───本文论述垂直和横向进给量的公制与英制共用机构，自动快速移动和自动微量进给机构。

Those side surfaces are generated through the use of the cross feed, contrary to turning operations, where the usual longitudinal feed is used.───一般采用纵向进给的车削作业相反，那些侧表面通过采用横向进给产生。

The plunge-cut method, in which grinding is achieved through the cross feed of the grinding wheel and no axial feed is applied.───插入-切削方法：这种方法通过砂轮的横向进给完成磨削而不采用轴向进给。

Any desired depth of cut can be obtained by the cross feed of the grinding wheel.───通过砂轮的横向进给能得到任意所需的切削深度。

WOODWORKING MACHINES. MACHINES WORKING IN FEED DIRECTION AND CROSS FEED DIRECTION. NOMENCLATURE.───木材加工机械.纵向和横向加工机.术语

The depth of cut is adjusted by the cross feed of the grinding wheel into the workpiece.───切削深度通过改变砂轮对工件的横向进给来进行调整。

I suspect a cross-feed option could be interesting because some instruments feel a little too much on one side or the other.───我怀疑跨饲养选项可能是有趣的因为一些工具在一之上有点儿觉得很多边或另一个。

With the FVS 3201, the product is fed into the agitator funnel either via a direct infeed or a frequency-controlled cross feed auger.───随着3201通量向量分裂，产品送入搅拌漏斗，可通过直接进料或频率控制的横向进给钻。

英语使用场景

Those side surfaces are generated through the use of the cross feed, contrary to turning operations, where the usual longitudinal feed is used.

In this paper, cross feed precision of cylindrical grinder micro-feed executive body combined with numerical control, i. e. of deforming micro-feed center, has been studied.

Any desired depth of cut can be obtained by the cross feed of the grinding wheel.

Groove cutting. In cut-off and groove-cutting operations, only cross feed of the tool is employed. The cut-off and grooving tools, which were previously discussed, are employed.

This article describes the vertical and cross feed mechanism for both metric and inch system. It is able to perfom automatic, rapid travelling and micro feed.

The depth of cut is adjusted by the cross feed of the grinding wheel into the workpiece.