adhesive strength信息详情
粘合强度
defensive strength───防御力
tensile strength───[力]抗张强度
collective strength───集体力量
improve strength───提高力量
muscle strength───肌肉强度
shear strength───切变强度
tensile strengths───[力]抗张强度
magnetic pole strength───磁极强度
adhesive bandage───胶布绷带
The viscosity, bulk and adhesive strength were tested.───测试了胶粘剂的本体强度、粘接强度和粘度。
Soles with a special adhesive strength of the joint and it certainly will not unglued!───鞋底是用特制的强力胶粘合的,保证不会脱胶!
effect of polyvinyl acetals on its adhesive strength was investigated.───探讨了聚乙烯醇缩醛的粘接强度的影响。
Adhesive strength, hardness and the thermal shock resistance of spraying coating were tested.───测试了喷涂层的结合强度 、 硬度以及抗热震性能.
Because the adhesive strength, viscosity, cohesive, and so we can decide the book bond stretch.───因为胶粘剂的强度 、 粘度 、 粘性等才能决定书册粘结的牢度.
We use of varnish the sign up to standard, the adhesive strength is excellent, chatoyant brightness.───我们使用的油漆符合标准, 附着力优异, 光泽明亮.
Experiments results indicated this adhesive has better resistance to high temperature, flameproofing and adhesive strength.───实验表明,该胶粘剂具有较好的韧性、耐温性 、 阻燃性和较高的粘结强度.
In it's raw state, LS has very little adhesive strength.───在它的原始状态, 液体软陶有一定的粘结强度.
The tile water adsorption also affect on the adhesive strength clearly.───瓷砖的吸水率对粘结强度也有明显的影响.
Minimum adhesive strength build up ensures easy peeling without adhesive migration and delamination.───低逐加粘合度可确保易于剥离而不会产生溢胶和分离.
They show excellent mechanic properties, with high adhesive strength andtheir thermal shocking resistance is also good.───结果表明:两系列的涂层组织致密, 结合强度较高,抗热震性能良好,显示出良好的综合力学性能.
The adhesive strength of the acid film was stronger than that of the alkali film.───碱性镀层的结合强度优越于酸性镀层.
Extender - dependent adhesive strength of the emulsion were also investigated.───还讨论了扩链剂对其粘结强度的影响.
The powder types and the spray parameters have significant influence adhesive strength of the coating substrate.───粉末种类与喷涂条件对涂层的结合强度有明显的影响.
The P ( VAc - MMA - AA ) emulsion shows apparent improvement in freezing resistance, adhesive strength as well as water - resistance.───结果表明,所得改性P ( VAc -MM A - AA ) 共混乳液的耐水性、耐热性 、 耐寒性及粘结强度较PV Ac均聚物乳液均有明显改善.
The factors which influenced adhesive strength, curing speed of reactive polyurethane hot melt adhesive were studied.
In order that thermal sprayed coats are made to have higher adhesive strength, commonly a thin layer of bonding is precoated, then the functional layer is sprayed again.
We use of varnish the sign up to standard, the adhesive strength is excellent, chatoyant brightness.
The results showed that the influence of UV light on adhesive property was great, and protection can slow the deterioration of adhesive strength of CFRP and concrete.
Minimum adhesive strength build up ensures easy peeling without adhesive migration and delamination.
The influence of dual factor combination on adhesive strength was studied by dimension decreasing standard analysis.
Interdiffusion of the elements existed at the interface of the laminated YF 1 and steel A3 with a high adhesive strength.
When metal substrate and the coating are heated or cooled there would cause remanent stress to weaken the adhesive strength between them on account of their various expansion coefficients.
It is obtained from test that the Rare - earth additives can improve the adhesive strength, decrease porosity, make porousness smaller, therefor, raise the properties of the arc spraying coatings.