steel parts发音

意思翻译

钢制零件

相似词语短语

parts───n.[机]零件，部件；n.(Parts)人名；(瑞典)帕茨；(爱沙)帕尔茨

steel───adj.钢制的；钢铁业的；坚强的；n.（Steel）（德）施特尔；（英）斯蒂尔（人名）；n.钢铁；钢制品；坚固；vt.钢化；使冷酷

dishwasher parts───洗碗机配件

stove parts───炉灶零件

steel strings───钢绳弦线

steel tape───卷尺；[计量]钢卷尺；钢合尺；传力片；钢合尺，钢卷尺; 钢带

lifter parts───升降器零件

tinned steel───镀锡钢

damascus steel───大马士革钢；表面带水纹的刀箭钢；大马士革钢，表面带水纹的刀箭钢

双语使用场景

The fuselage and wings are made of mainly fibreglass, with some wooden and steel parts.───机身和机翼主要用玻璃纤维制作，还有一些木制和钢制部件。

Several alternative chemical treatments are defined for passivation of stainless steel parts.───几种可供选择的不锈钢部件化学钝化处理在此有详细规定。

All these things mean aluminium could replace more steel parts in cars, especially where strength is important, as in suspension components.───所有这些意味着铝零件能够在汽车上代替更多钢铁零件，特别是那些强度十分重要的部件，例如汽车悬挂部件。

At present, the complex shape stainless steel parts, the hand-polishing, or to occupy a dominant position.───目前，对于形状复杂不锈钢件来说，手工抛光还是占据了主要地位。

The addition of carbon to the surface of steel parts and the subsequent hardening operations are important phased in heat treating.───钢件表面碳的加入量和随后的硬化措施都是热处理很重要的阶段。

Steel parts are usually covered with grease, with which they may not rust.───钢零件通常用润滑油覆盖，以免生锈。

The production experiments of using Ming Lang sand to cast steel parts are also carried out with better results.───并在小型铸钢件上进行代替树脂砂生产试验，取得了良好的效果。

Satisfactory polishing surface cannot be obtained on stretched stainless steel parts by traditional electroless polishing process.───不锈钢拉伸工件采用常规的化学抛光工艺不能达到理想的效果。

It is of great significance to austenitic stainless steel parts applied in the severe corrosion environment.───这对于要求应用在恶劣腐蚀环境中的奥氏体不锈钢机械零件具有重要意义。

英语使用场景

After steel parts are welded, the cooling speed directly affects the quality of welding.

Opal paste liquid , It's applicable for vibration brighting and centrifugal grinding for aluminum alloy steel parts.

In this paper, large alloy iron parts and low-alloy steel parts after surface heat treatment, used in the diesel engine , were tested and compared. By Leeb hardness sclerometer.

The fuselage and wings are made of mainly fibreglass, with some wooden and steel parts.

All internals have been selected for their anti-corrosion properties; include chromium plated mild steel, brass and stainless steel parts.

Laser ultrasonic technique is used for contactless inspection of diffusion bonded steel parts.