pressure setting信息详情

pressure setting发音

意思翻译

压力整定;压力设定;压力调整

相似词语短语

setting───n.环境;安装;布置;[天]沉落;v.放置;沉没;使…处于某位置(set的ing形式)

pressure───vt.迫使;密封;使……增压;n.压力;压迫,[物]压强

speech setting───语音设置

brightness setting───亮度设置

setting off───使爆炸,出发; 断流;使爆炸;断流

temp setting───调温(=temperatureset);温度调节

factory setting───工厂设定;出厂设置

heat setting───热定型;[纺]热定形

setting up───设立;装置;调定,安装; 刷毛; 汽蒸

双语使用场景

could be equipped by suitable actuator and control value according to different pressure setting range.───可根据不同的压力设定范围而选配合适的执行器与控制阀组成调压阀。

it this way: At a low pressure setting everyone is wearing roller skates, which can change direction very easily.───这样看待问题:当交通压力小的时候,行人就像穿溜冰鞋行走,很容易改变方向。

The horsepower available and the lowest pressure rating of any component limit the pressure setting.───可用的马力和任何部件的最低压力限制了压力的设置。

Selectable spring ranges to allow for accurate , easy to adjust pressure setting .───可选择弹簧作用范围,以便更精确、更容易地调节压力设置。

Pilot valve pressure setting on the adjustable Enlarge the small set pressure, you can set the flow of a small flat tone.───导阀上的设定压差可调,调大调小设定压差,可以调大调小设定流量。

The pressure setting ofthe pressure-relief valve must not be less than 75%, nor more than100% of the minimum test pressure of the cylinder.───降低压力阀的压力设定值不能小于钢瓶的最小测试压力的75%,也不能大于它的100%。

This insufflator automatically regulates the flow rate to maintain an abdominal pressure equal to the pressure setting.───本注气器可自动校对流速,以使腹部压力不偏离预先设定。

The amount of lag is dependent on the size of the turbo s used and the pressure setting.───滞后的数量取决于大小的增压器使用和压力设置。

The 116-52 responds by opening at a preset low pressure setting, allowing for quick relief of the returning high pressure wave.───116-52通过开启预置低压设置点来做出响应,使其迅速释放返回的高压波。

英语使用场景

This insufflator automatically regulates the flow rate to maintain an abdominal pressure equal to the pressure setting.

Preventive measures for excursion of pressure setting point are also mentioned.

This insufflator automatically regulates the flow rate to maintain an abdominal pressure pressure setting.

Note: a pressure gauge downstream to adjust and verify the pressure setting.