rejection ratio信息详情
废品率;衰减率;舍弃率
rejection───n.抛弃;拒绝;被抛弃的东西;盖帽
rejection number───[工经]拒绝数;退件数;拒绝数,舍弃数
rejection rate───废品率,报废率,舍弃率;[工经]废品率;报废率
rejection letter───拒绝信
ratio───n.比率,比例
variation ratio───异众比率;变异比率;变速比,变速范围
rejection region───拒绝域;[数]否定区域;否定区域,拒斥域
click ratio───点击率
gyromagnetic ratio───[电磁]旋磁比;[物]回磁比
This circuit features low temperature coefficient and high power supply rejection ratio.───该电路有较低的温度系数和较高的电源抑制比。
By adding some auxiliary circuits, the power rejection ratio of the circuit is improved.───通过增加一些辅助电路,提高了电路的电源抑制比。
In this situation, the CMRR (common-mode rejection ratio) of the input differential amplifier was unsatisfactory.───在这种情况下,输入差分放大器的CMRR 不令人满意。
Common Mode Rejection Ratio: The ratio of the input voltage range to the peak-to-peak change in input offset voltage over this range.───共模抑制比,输入电压范围除以该范围内输入失调电压峰峰值。
In addition, we test the rejection ratio of very sample and get the result of the rubber sponge ball no damnification to the membrane.───并且通过测定各个样品对卵清蛋白的截留率表明海绵橡胶球清洗并没有造成管式膜的破损。
Results from HSPICE simulation show that the circuit has a high power supply rejection ratio (PSRR) and low temperature coefficient.───HSPICE模拟和测试结果表明,所设计的电路具有较高的电源抑制比和良好的温度特性。
Methods The EEG with instrumentation amplifier of high CMRR (Common Mode Rejection Ratio) and some filters are collected.───方法:采用高共模抑制比的前置放大器以及多种滤波手段,保证较理想的获取脑电信号。
A novel current reference source based on subthreshold MOSFET's with high power supply rejection ratio(PSRR) is presented.───基于亚阈值MOSFET,提出了一种新颖的高电源抑制比(PSRR)电流基准源。
The membrane thickness and rejection ratio increased whereas porosity and water flux decreased with polymer concentration increased;───随固含量增加,膜厚度增加,孔隙率降低,水通量减小,截留率升高;
In this situation, the CMRR ( common-mode rejection ratio ) of the input differential amplifier was unsatisfactory.
Its common mode rejection ratio ( CMRR ) was 65 dB at 100 kHz.
A novel current reference source based on subthreshold MOSFET's with high power supply rejection ratio(PSRR) is presented.
The advantages of using a spectrum analyser to measure image rejection ratio of a tuner are direct in observation, accurate in reading, easy in operation and so on.
Normal mode rejection ratio (NMRR) defines how well the instrument rejects or attenuates noise that appears between the HI and LO input terminals.
Normal Mode Rejection Ratio. The ability of an instrument to reject an AC interference (usually of line frequency) across its input terminals. Usually expressed in decibels at a frequency.
Thermal stability and Power Supply Rejection Ratio of the voltage reference circuit are the two major factors that influence the precision and stability of the whole system.
The circuit has advantages with ingeniously conception, well structure, integrated easily, more open-loop gain, more common-mode rejection ratio and alternating current characteristic.
This circuit features low temperature coefficient and high power supply rejection ratio.
- secondary disaster
- torsional capacity
- risk management and capital compliance
- their birthdays
- s n g b
- snapcamera
- pressure calibration
- tian yi
- true code
- system productivity
- tian ying
- risk management and insurance
- snapchat
- pure minutes
- torsional dynamometer
- pressure can be a power
- their blood
- share the fun with you
- rasa sayang
- s n j c
- political power grows