tearing strength信息详情

tearing strength发音

意思翻译

[力]抗撕强度;撕裂强度

相似词语短语

tearing───v.撕开;裂开(tear的现在分词);adj.撕裂的;痛苦的;猛烈的,极端的;极好的;暴怒的

strength───n.力量;力气;兵力;长处

tearing off───撕下;扯掉

tearing into───猛攻

tearing up───撕毁;撕碎;拉掉

shear strength───切变强度

annular tearing───环状撕裂

lamellar tearing───层间撕裂;层状撕裂

sapped strength───磨损强度

双语使用场景

When webs weight increases, rupture strength, tearing strength and bursting strength are increased.───随着纤网定量的增加,断裂强度,撕破强度和顶破强度增加。

effects of beating and pressing on the tearing strength of paper also have been investigated.───本文主要研究论述硫化体系对硫化硅橡胶老化后撕裂强度的影响。

Used for testing tearing strength of woven fabric, light-weight nonwoven fabric and coated fabric.───用于测定机织物,薄型非织造布及各种涂层织物的撕破强力。 U。

It has high tensile strength, peeling strength and tearing strength, it has long life compare to cold and heat lamination ones.───与冷和热层压箱相比,具有较高的抗拉强度,剥离强度,撕裂强度,寿命长的特点。

However, if the yarns are packed too tightly, the fabric will have reduced tearing strength, abrasion resistance and wrinkle recovery.───但是,如果纱线密度过大,织物的撕裂强度、耐磨强度及折皱恢复能力会降低。

The elongation at break, tensile strength and tearing strength of the HVSSBR cured with EV system are the best.───有效硫化体系的断裂伸长率、拉伸强度、撕裂强度、耐磨性、抗热氧老化性能最好。

Influence factors of PVC coating agent on tearing strength of coated fabric by changing coating agent composition is studied in this paper.───通过对涂层剂组成的调整,研究影响聚氯乙烯涂层织物撕裂强度的因素。

but tearing strength and pH is less important.───而撕裂度、酸碱性等因素影响较小。

however, the tearing strength of the hand-sheets decreased first with the increasing dosage of SDS and then increased;───撕裂度先随非离子瓜尔胶用量的升高而下降其后随之提高;

英语使用场景

The stability of chitosan and the breaking length, tearing strength, folding endurance and bursting strength of paper added the potentiator were measured.

Breaking elongation, tearing strength, and bursting strength of fabric firstly increased and then decreased with the decrease of honeycomb size.

The effect ampherlytic starch on tearing strength of newsprint from analysis of electric charge was studied.

Paper birch is the best of the hardwood, often running in bursting strength up to 80% and in tearing strength up to 90% of spruce pulp.

When webs weight increases, rupture strength, tearing strength and bursting strength are increased.