thrust bearings发音

意思翻译

[机]推力轴承；[机]止推轴承

相似词语短语

bearings───n.轴承（bearing的复数形式）

thrust───n.推力；刺；要旨，重点；强攻；冲断层，逆断层；苛评；v.插；插入；推挤；插入；用向某人刺去；猛然或用力推；伸展；强使接受；竖起，挺出

thrust capacity───轴向负荷支承能力

armorial bearings───n.纹章，徽章；徽章；纹章

thrust upon───强加于

thrust to───推力

antifriction bearings───[机]减摩轴承；滚动轴承

thrust at───刺向…

flanged bearings───带法兰盘轴承

双语使用场景

optimization design model is established for structural parameters of magnetic thrust bearings.───建立了磁悬浮推力轴承结构参数优化设计数学模型。

Most cylindrical roller thrust bearings are single-direction bearings.───大多数推力圆柱滚子轴承是单方位轴承。

In this paPer, nonlinear dynamic characteristic and transient performance of thrust bearings are studied.───本文主要研究了推力轴承的非线性动特性和瞬态性能。

The designation suffixes used to identify certain features of SKF cylindrical roller thrust bearings are explained in the following.───型号中的后缀用于鉴别SKF滚子推力轴承的某些特征，现解释如下

The designation suffixes used to identify certain features of SKF spherical roller thrust bearings are explained in the following.───用来识别SKF球面滚子推力轴承某些特点的型号后缀解释如下。

In this paper, the advantages for construction of thrust bearings, turbine guide bearings, main shaft seal, runner seal are analyzed.───通过运行实践，本文对该水轮发电机组的推力轴承、水导轴承、主轴密封、转轮密封等主要结构进行了分析，仅供参考。

The flux leakage in the rotor of the magnetic thrust bearings has a great effect on the bearings performance.───电磁推力轴承中转轴内存在的漏磁现象对轴承的工作性能有较大的影响。

The same general equation also applies to spherical roller thrust bearings, which can accommodate both axial and radial loads.───相同的一般公式还适用于可承受径向和轴向载荷的球面滚子推力轴承。

Flow reversal causes the bundle to thrust back and forth, damaging thrust bearings.───反向气流造成转子前后挤推从而损坏止推轴承

英语使用场景

Remove thrust bearings from rear main bearing carrier.

Yoke Sleeve aluminum - bronze yoke sleeve minimizes operating torque. Larger sizes have needle bearing type thrust bearings.

Due to their specific kinematic behaviour, cylindrical roller thrust bearings are only suitable for low speed applications only.

Most cylindrical roller thrust bearings are single-direction bearings.

To avoid sliding that occurs in cylindrical roller thrust bearings, the taper angle of the rollers is selected so the extended contact lines intersect on the bearing axis.

In this paPer, nonlinear dynamic characteristic and transient performance of thrust bearings are studied.

Spherical roller thrust bearings are deigned in such way that their rollers are spherical shape, and the raceway surface of housing washer is also spherical, so these borings woo self-oligned.

Larger sizes have needle bearing type thrust bearings.