pump discharge发音

意思翻译

泵出口；[机]泵排量；泵排出口

相似词语短语

discharge───n.出院，免职；释放；（液体、气体等的）排出；排出物；放电；开枪；下客；履行责任；（债务的）清偿；v.准许（某人）离开；释放；排出；放电；履行（职责）；开火；卸货；（法官）撤销（法院命令）

pump───v.抽吸；喷出；注入；射向目标；打气；（非正式）盘问；剧烈上下晃动；让……使用大量药物；洗胃；增加数值；n.(Pump)（美、俄、印、泰、加）蓬普（人名）；n.泵；泵送；无带浅帮女鞋；平底轻便鞋

whitish discharge───白色放电

corollary discharge───推测放电

static discharge───静电放电

glow discharge───[电子]辉光放电

discharge port───卸料口，出料；卸料口，卸货港；排水口

constructive discharge───事实上的解雇；推定解雇

discharge rate───[电]放电率；排气量；卸料速度；卸料速度; 卸载速度; 排出率; 放电率

双语使用场景

maximum head is suitable for pump discharge to butanol handling facility.───泵出口去丁醇处理装置的最大扬程是合适的。

level of suction pumps for the axial direction, pump discharge outlet may be fitted into the needed horizontal or vertical direction.───泵吸入口为轴向水平方向，泵排出口可根据需要装成水平或垂直方向。

On pump discharge, the preferred check valves are in-line spring loaded, swing design with lever and weight or lever and spring.───在泵出口处，首选止回阀是管内弹簧负载，配置杠杆和重量旋启式结构，或杠杆和弹簧旋启式结构。

Note: Preferred mounting of check valves of any manufacturer is 5 pipe diameters downstream from the pump discharge or pipe elbow.───注释：任何制造商的止回阀最好安装在泵排泄口或管道弯头下游5倍管道直径的位置。

Additional make up can be added via the start -up fill line from the Reactor Feed pump discharge, to flush the line to the Stripper.───增加的补充量可通过开车加料管线从反应器进料泵出口加入，把管线冲洗到汽提塔。

Indicating pressure transmitters shall be used in preference over pressure gauges except for pump discharge.───带指示的压力变送器除了泵出口应优先于现场压力表被使用。

Install chemical tanks as required, and ensure each dose pump discharge tubing is connected to the manifold injection points provided.───按要求安装化学箱槽时，确保每根加药泵的排放管线与相对应的注入点相连接。更详细。

On pump discharge , the preferred check valves are in- line spring loaded , swing design with lever and weight or lever and spring .───注意：在泵的排泄口处，首选的止回阀是管内弹簧负载，旋启式，配置杠杆和重量或杠杆和弹簧。

The utility model has simple structure and can enlarge the oil pump discharge capacity proportion regulation range.───本实用新型结构简单，能够扩大油泵排量比例调节范围。

英语使用场景

CTC maximum head is suitable for pump discharge to Butanol handling facility.

Press out the liquid at this time to overcome the pressure out of pipeline systems with all the necessary resistance to the pressure from the pump discharge.

Reciprocating pump discharge pipe must be before the start of the valve to open.