shaft position发音

意思翻译

[自]轴位置

相似词语短语

shaft───vt.欺骗；苛待；n.竖井；通风井；（电梯的）升降机井；杆，柄

position───v.安置；把……放在适当位置；n.位置；姿态；处境，地位；观点；职位，工作；站位

diaphysis shaft───中间轴

mandrel shaft───心轴

transmission shaft───n.[机]传动轴；n.传动轴

shaft sleeve───大轴衬面; 轴套；[机]轴套；轴套筒；密封衬套

main shaft───n.[机]主轴；总轴；主轴，总轴

shaft seal───[机]轴封，轴封装置；主轴密封；轴的密封装置; 轴封

steering shaft───转向轴，操舵轴；[机]转向轴；操舵轴

双语使用场景

position coder is necessary in order to control the rotary robot precisely.───实现对转动机器人的精确控制，必须进行高精度的角位置检测。

Provides 30 degrees of adjustment to align the signal outputs to the shaft position.───提供30度的调整，使该信号输出轴的位置。

fast - idle CAM position is controlled by an arm on the choke shaft.───快怠速凸轮的位置是由阻风门轴上的杆臂控制的。

and a supporting tube is sleeved outside the spline shaft position between the box body and the gearbox body of the bevel gear.───位于箱体和伞齿轮变速箱体之间的花键轴部位外套支撑管。

The insertion of the initial velocity is accomplished by offsetting the motor shaft position prior to the start of navigation.───初始速度的加入可以在导航开始前用预先装走马达轴的位置来实现。

The motor torque, speed, or shaft position must be controlled.───电动机的扭矩，速度，或轴的立场，必须加以控制。

The actuator drives the 0-70 degree output shaft to the demanded position based on an internal shaft position sensor.───致动器驱动0-70度的输出轴到要求的立场的基础上，内部轴位置传感器。

Deviations of Shaft Centre Distances and Shaft Position Tolerances of Casings for Cylindrical Gears───圆柱齿轮箱的轴位公差和轴距偏差

英语使用场景

The high resolution shaft position coder based on the multi-pole rotary transformer and RDC is used widely in shaft position measurement of radar.

A shaft position coder is necessary in order to control the rotary robot precisely.