submerged nozzle发音

意思翻译

浸入式水口

相似词语短语

submerged───v.（使）潜入水中，淹没( submerge的过去式和过去分词 ); 完全掩盖，遮掩；adj.在水中的; 淹没的; 水下的; 水下运动的；v.潜入水中（submerge的过去分词）；使陷入；adj.水下的，在水中的

guarder nozzle───保护喷嘴

submerged wreck───沉船

nozzle spray───[医] 喷嘴

nozzle air───喷嘴空气

submerged definition───淹没定义

nozzle equation───喷嘴方程

nozzle valve───[动力]喷嘴阀

dredge nozzle───挖泥嘴

双语使用场景

The results show that the submerged nozzle ingate angle and depth of its immersion should decrease gradually with the lowering of casting speed.───结果表明，随着拉速的降低，水口的上倾角大小和浸入深度应逐渐减小。

Selecting correctly the submerged nozzle is not only concerned with property of the nozzle but also the operation conditions.───正确选择使用浸入式水口除与本身性能有关外，工艺操作条件也有一定的影响。

forming mechanism of the submerged nozzle clogging is investigated.───研究了浸入式水口堵塞的形成机理。

Submerged nozzle must be preheated before casting. Now, burning the coal gas is the usual preheating method.───浸入式水口在浇钢以前必须进行充分预热，利用燃烧的煤气烘烤水口是常用的预热烘烤方式。

The bearing steel production is delayed by the submerged nozzle clogging.───由于生产轴承钢水口的堵塞，严重影响生产的顺利进行。

and the local structure of grain near the inlet of submerged nozzle has an effect on slag accumulation process.───喷管潜入段入口处药柱燃面的形状对潜入段内熔渣的沉积过程具有一定影响。

Study on Synthesis of Magnesia-alumina Spinel Refractory for Inner-lining of the Submerged Nozzle for Continuous Casting───连铸复合式水口内层用镁铝尖晶石质耐火材料的合成研究

Mechanism investigation and numerical simulation of slag deposition for submerged nozzle───潜入喷管背壁区熔渣沉积的机理分析与数值模拟

英语使用场景

A super-flat submerged nozzle (SEN) was developed for beam blank caster of Laigang to achieve full protection for casting.

The results show that the submerged nozzle ingate angle and depth of its immersion should decrease gradually with the lowering of casting speed.

The bearing steel production is delayed by the submerged nozzle clogging.

The forming mechanism of the submerged nozzle clogging is investigated.