tool material发音

意思翻译

[机]工具材料

相似词语短语

material───n.材料；用具；（有指明特征的）人才；素材；曲目；布料；adj.物质的；身体需要的；和推理内容有关的；重要的；（证据或事实）决定性的；客观存在的；物欲的；n.(Material)（意、美）妈特力娅丽（人名）

tool───vi.使用工具；用机床装备工厂；n.工具，用具；器械，机床；手段；vt.用工具给……加工

instructional material───教材

reading material───阅读材料; 读物；阅读材料；[图情]读物

material arts───物质性艺术

material handler───仓库管理员；物料管理员

phosphorescent material───发磷光物质

waste material───[环境]废物；[材]废料；[经] 废料; 废物

belting material───皮带衬料

双语使用场景

The cutting tool material is best used hard alloy.───刀具材料最好采用硬质合金。

PCD tool is the best tool material for precise machining from points of the cutting force view.───从切削力这一因素来看，PCD是精加工颗粒增强铝复合材料的最佳刀具材料。

Based on the results of experiment, the suitable tool material and machining parameters are confirmed.───根据试验结果，确定适合加工该型号高强度钢的刀具材料和切削用量。

Strength in cutting - tool material is not always proportional to hardness.───切削刀具材料的强度并不都是与硬度成正比的。

Selection of appropriate cutting tool material and geometric parameters are among the key conditions for dry machining.───适宜的刀具材料和刀具几何参数是干切削加工的关键条件之一。

Tool system is the structure constitutes a tool of the system, which mainly refers to tool material, tool and toolholder.───刀具系统是指构成刀具的系统结构，其中主要是指刀具材料、刀具结构和刀柄。

The cutting tool material should therefore have high abrasion resistance to improve the effective life of the tool.───因此切削刀具材料应具有高耐磨性以提高刀具的有效寿命。

High grade tool material is adopted. It has undergone special quench and annealing treatment.───采用高级专用工具钢材料，经过特殊淬火和退火处理。

It analyses structure design of tool, selection principles of tool material, tool processing, brazing technique and work accuracy.───分析了刀具的结构设计、刀具材料的选择原则、刀具加工、钎焊工艺、制造精度等；

英语使用场景

JX-2-I is an advanced ceramic tool which has been developed recently. Hot-pressing technology parameters have a great effect on mechanical properties of tool material.

Tool material and coating technology which are adapted for quench hardening stell milling are introduced.

From products plan, craft so preparation of design, tool, material is purchased, semifinished product is made, spare parts treatment should be with this accurate.

The conditions which have an important influence on metal cutting are work material, cutting tool material, cutting tool geometry, cutting speed, feed rate, depth of cut and cutting fluid used.