tool joint信息详情
钻具接头
joint───n.关节;接缝;接合处,接合点;(牛,羊等的腿)大块肉;(非正式)娱乐场所;(非正式)大麻烟卷;(电影或音乐的)创意作品;n.(Joint)(美)茹安(人名);v.连接,贴合,接合;使有接头;把(动物)切成大块肉;adj.联合的,合办的;共同拥有的;连带的;连接的
tool───vi.使用工具;用机床装备工厂;n.工具,用具;器械,机床;手段;vt.用工具给……加工
pizza joint───披萨店
articulus joint───关节
joint venture───合资企业;[经管]联合经营
drawbore joint───拉丝孔接头
joint ease───关节松动
fosset joint───窝关节
joint tenants───[经] 联合(共同)租赁者,联合所有者,合有者;共同租赁人
procedure is repeated whenever a tool joint must pass by a ram BOP.───当工具接头需要通过闸板型防喷器时,就必须不断地重复上述步骤。
tong is placed on the top tool joint and the break-out tong is placed on the bottom tool joint.───钳打在上边的接头上,内钳打在下边的接头上。
We are considering a machine tool joint venture of moderate scale.───我们正在考虑建立一个中等规模的生产机床的合资企业。
The result of the test show that the double shoulder tool joint do not appear thread gluing and have a excellent sealing performance.───实验结果证明双台肩钻具螺纹抗粘扣性能较好,没有出现粘扣,接头密封性能优良。
Note: Since a bending force is exerted on the pipe during make up, the tool joint connection must be set in the slips as low as possible.───注意:由于紧扣时,钻具要承受弯曲力,应将卡瓦坐在尽可能低的位置。
Special attention must be paid to ensure the rig tongs are not placed on the hard banding of the tool joint.───要特别注意,不能把钳子打在接头的耐磨带上。
The torsional strength of the drilling tools can be greatly increased by using the double shoulder tool joint.───双台肩钻具接头可大幅度提高钻具的抗扭强度。
The dog collar is temporarily attached to the assembly between the tool joint and the slips.───爪环暂时地固定在工具接头与卡瓦之间的工具组合上。
The floor men engage the rig tongs onto the drill pipe or other tubular tool joint.───钻工们把大钳打在钻杆或其他管具的接头上。
We manufacture the tool joint, make the seal test and make-and-break test.
- riffed
- refueling youth
- symbol not found
- the voice within my heart
- smart water heater
- rainfall rate
- signal shaping
- su yao
- start study
- space strategy
- running wire
- sexual relation
- sexual relations
- the voices
- rainfall record
- rainfall recorder
- running wild with bear grylls
- pull plants
- the cutest girl
- smart water meter
- the cutest killer