side cutting发音

意思翻译

[铁路][水利]边坡挖土

相似词语短语

cutting───adj.尖酸刻薄的；严寒的，刺骨的；锋利的；v.切割；凿成；剪短；把……切碎；划破（cut的现在分词）；n.剪报；插枝，插条；狭窄通道，路堑；切割，切断；割下的东西；n.（Cutting）（美、澳、印）卡廷（人名）

cutting line───切割线；截线

cutting down───研磨修整；磨掉

cutting shapes───切割形状

cutting board───n.切肉板

side to side───从一边到另一边；边对边

cutting machine───切削机，[机]切割机；裁切机，裁剪机；截煤机；下料压力机；切削机; 下料压力机; 裁剪机; 裁切机

cutting paper───剪纸；裁纸

side in side───并排

双语使用场景

In general the major roll forging processes consisted of blanking, heating, roll forming, locally sizing, side cutting, bending and integrally hot correcting.───主要工艺流程为：下料、加热、成型辊银、局部整形、切边、弯曲、整体热校正。

facilities for side cutting tests and some test results are introduced.───侧向切削的实验设备和一些试验结果。

Cutting the cone at various angles gives you various shapes of ellipse. Until the angle of your cut exceeds the angle of the side of the cone.───不同角度切割圆锥，你便会得到不同的椭圆，直到你的切割角度超过圆锥体侧边的角度。

Chief engineer: Chief Officer has looked up. Look: non-spark side cutting pliers-; screw plate-; adjustable wrenches .───轮机长：大副已经查到了。看，铜老虎钳；组合螺丝刀；活搬手。

The second one was to play line, is a book block and cover with good, then by a three-side cutting into light book hit four or six eyes.───第二次是打线眼，是书芯与封面配好，并粘牢，再经三面裁切成光本书后，打四个或六个眼。

PLIERS AND NIPPERS. LEVER ASSISTED SIDE CUTTING, END CUTTING AND DIAGONAL CUTTING NIPPERS.───夹扭钳和弯切钳.侧切钳

Pliers and nippers - Lever assisted side cutting pliers, end and diagonal cutting nippers - Dimensions and test values───夹扭钳和剪扭钳.杠杆辅助的侧剪切钳，端剪切钳和钭口钳.定义和试验值

Computer simulation for the side-cutting of roller bits───牙轮钻头侧向切削的计算机仿真

Combination pliers with side cutting jaws transparent insulated handles, chrome plated───透明胶柄镀铬花腮钳

英语使用场景

Side rake angle is the angle between the face of the tool and the base of the shank or holder and is usually measured in a plane perpendicular to the bade to the side cutting edge.

Side relief angle is the angle between the portion of the side flank immediately below the side cutting plane perpendicular to the side flank.

In this report, an overall analysis of wellbore deviation is presented. The theoretical study in side cutting mechanism and side cutting ability of cone bits are described.

The original ingate was enlarged by side cutting and roof cutting under the condition of filling behind wall by grouting, and then be supported and reinforced by the secondary support technology.