tapping temperature发音

意思翻译

出钢温度

相似词语短语

tapping───n.(Tapping)（英、美、加、澳、法）塔平（人名）；n.出钢；开孔；出渣；轻敲声；v.轻敲，轻拍（tap的现在分词）

temperature───n.温度；体温；气温；发烧

tapping hole───[化] 螺纹孔，螺丝孔；螺纹孔，螺丝孔；[矿业]放出口

tapping asmr───攻丝asmr

tapping screw───[机]自攻螺钉

critical temperature───[物][电子]临界温度；n.临界温度

tapping point───抽头点，分接头；抽头点；[电]分接点

temperature outside───室外温度

temperature rise───[电]温升；温度上升；温度上升，温升，升温

双语使用场景

mathematical model in heating furnace is set up for calculating billet tapping temperature according to billet heterogeneity, specification and opening rolling temperature.───根据钢坯的种类、规格、开轧温度，通过建立的数学模型计算了钢坯的出炉温度。

Besides of the high tapping temperature, it is difficult for the vessels to prolong service lives remarkably by slag splashing.───由于转炉出钢温度也偏高，实施溅渣护炉以大幅度提高炉龄比较困难。

The appropriate tapping temperature and composition, designed for primary melting GH1040 base metal in arc furnace, provide necessary energy for VOD refining.───设计的初炼炉出钢成分及其出钢温度，为GH1040母材在VOD精炼过程中提供了所需要的热能。

The production practice showed that increasing tapping temperature is the key to obtain high quality iron melt.───经生产验证，提高铁液的出炉温度是获得优质铁液的关键；

Study on Relationship between Casting Speed and Liquid Level and Mould Tapping Temperature───拉速液位与结晶器出钢温度的关系研究

Prediction model on post-tapping temperature of liquid steel in ladle───转炉出钢后钢包内钢水温度预测模型

The study on forecasting tapping temperature according to billet opening rolling temperature───由钢坯开轧温度预测钢坯出炉温度的研究

英语使用场景

The appropriate tapping temperature and composition, designed for primary melting GH1040 base metal in arc furnace, provide necessary energy for VOD refining.

The key technology and essential conditions to obtain good splashes effect are to control the ingredients and quantities of finishing slag, the tapping temperature and the gun position reasonably.

The mathematical model in heating furnace is set up for calculating billet tapping temperature according to billet heterogeneity, specification and opening rolling temperature.

The results suggest that the corrosion of refractory decreases with CaO/SiO 2 ratio of slag increasing and tapping temperature dropping.

The production practice showed that increasing tapping temperature is the key to obtain high quality iron melt.

Besides of the high tapping temperature, it is difficult for the vessels to prolong service lives remarkably by slag splashing.