shrinkage rate发音

意思翻译

收缩率

相似词语短语

rate───n.(Rate)人名；(法、塞)拉特；n.比率，率；速度；价格；等级；vi.责骂；被评价；vt.认为；估价；责骂

shrinkage cavity───[机]缩孔

autogenous shrinkage───自生收缩量；自生收缩，自收缩

polymerization shrinkage───聚合收缩

flow rate───流量; 流率；[流][水文]流量；[流]流速

error rate───[计][通信]误码率；[计][通信]出错率

currency rate───通货汇率

rejection rate───废品率，报废率，舍弃率；[工经]废品率；报废率

applicable rate───[经] 适用的税率

双语使用场景

technology conditions that have effect on polyester shrinkage rate were discussed.───影响涤纶短纤维收缩率的工艺条件。

for a curing exothermic peak at the low shrinkage rate of new small unsaturated polyester resin.───为固化时放热峰低、收缩率小的新型不饱和聚酯树脂。

Composite silicate insulation material plasticity, low thermal conductivity, high temperature resistant, low pulp drying shrinkage rate, etc.───复合硅酸盐保温材料可塑性强、导热系数低、耐高温、浆料干燥收缩率小等特点。

The shrinkage rate of the injection mould for the various plastics is listed, the calculating applied examples are worked yet.───列出了各种塑料注射模的收缩率，还作了计算应用实例。

HCH-6993 for a curing exothermic peak at the low shrinkage rate of new small unsaturated polyester resin.───6993为固化时放热峰低、收缩率小的新型不饱和聚酯树脂。

This paper studies the self-made low profile additive and its influence on shrinkage rate and mechanical properties of UP resin.───本文研究了自制低收缩添加剂用量对不饱和聚酯树脂固化收缩率与力学性能的影响。

The dry shrinkage rate of standard curing concrete sand mortar evidently exceeded the steam curing simples at the same age.───标养水泥砂浆的干缩率明显大于同龄期蒸养水泥砂浆试件。

Introducing the example, volume and coverage shrinkage rate of persimmon were calculated.───并通过实例，对柿子干制时的体积收缩率和表面积收缩率进行了计算。

The effects of PET film traverse heat shrinkage rate on loss angle tangent value of capacitor charge -discharge process were introduced.───介绍了聚酯薄膜横向的热收缩率对电容器充放电后损耗角正切值的影响。

英语使用场景

The main quality indexes of coking wood has wood balance moisture content than unprocessed materials low around 3%, dry shrinkage rate less than 5%, superior teak 7%.

The dry shrinkage rate of standard curing concrete sand mortar evidently exceeded the steam curing simples at the same age.

Introducing the example, volume and shrinkage rate of persimmon were calculated.

The effects of PET film traverse heat shrinkage rate on loss angle tangent value of capacitor charge-discharge process were introduced.

The study results indicate that the developed alloys have good flowability, smaller shrinkage rate, good anti-cracking ability and smaller casting stress tendency.

However, this coating has disadvantages such as a long curing time, high shrinkage rate, poor performance bond, the quality of instability, and so on.