radial load发音

意思翻译

[机]径向载荷；径向负载

相似词语短语

radial───n.子午线轮胎；辐射道路；鳍辐骨；星形发动机；adj.辐射状的；（身体）中心区域的；桡骨的

load───vi.[力]加载；装载；装货；vt.使担负；装填；n.负载，负荷；工作量；装载量

radial symmetry───径向对称，放射对称；辐射对称；[数]径向对称；放射对称

radial tubeless───径向无内胎

secondarily radial───二次径向

anticlinal radial───背斜径向

radial acceleration───[物]径向加速度

radial engine───n.星形发动机；[动力]星形发动机

radial tuberosity───[解剖]桡骨粗隆

双语使用场景

A direction can only carry axial load, can't bear radial load.───只能承受一个方向的轴向载荷，不能承受径向载荷。

Radial load capacity, suitable for heavy load, impact load.───径向负荷能力大，合用于有重负荷、冲击负荷的情况。

They are all can't bear radial load.───它们均不能承受径向载荷。

Self-aligning bearings have high radial load capacity and to adapt to a number of both radial and axial load of a mixed load.───调心轴承具有较高的径向载荷能力，并且适应许多同时具有径向和轴向载荷的混合载荷情况。

Slewing ring bearing( slewing bearing), is a bearing that able to bear axial load, radial load and overturning torque.───转盘轴承，又称回转支承，是一种能够同时承受较大的轴向载荷、径向载荷和倾覆力矩的大型轴承。

If this is not the case , the single row full complement cylindrical roller bearing must be subjected to an additional radial load .───如果不是这样，单列满滚子圆柱滚子轴承必须承受额外的径向载荷。

If this is not the case , the alignment needle roller bearing must be subjected to an additional radial load .───如果不是这样，必须使对中滚针轴承承受额外的径向载荷。

Taper roller bearings are generally used to support combined load mainly consisting of radial load.───深沟球轴承主要承受径向载荷，也可承受一定量的轴向载荷。

When radial load is applied, the active bearing can suppress the displacement of the shaft, thus obtaining an infinite stiffness.───当有径向载荷作用时，自主式轴承能抑制轴颈位移并因此使轴承获得无穷刚度。

英语使用场景

With greater axial and radial load rating capacity, good replaceability of components. The shaft can be adjusted through external hexogan then to adjust the axial part dimension.

Split Plummer block, whose cap and base can be separated, mainly bear radial load. It fits for self-aligning spherical roller bearings or self-aligning spherical ball bearing.

On the single row angular contact bearings, radial load rating of bearing rings relative to each other purely radial displacement of the load of the radial component.

This paper presents the structural features and characteristics of the radial impact tester, torsional fatigue tester, rotary bending tester and radial load tester used for the tests.

Plain Bearing Block Housings are made up of cap, base , aluminum bronze bushing and installing bolts, which mainly bear radial load.

Taper roller bearings are generally used to support combined load mainly consisting of radial load.

Angular contact ball bearings are able to support radial load and axial load.

GRX serial of single stage and GR serial of double, three stage geared motor can support high permissible radial load.

Constant radial load (constant axial load center), in the load, the bearing can withstand 1 million transfer theory, the basic rating life.