tangent modulus发音

意思翻译

[机]切线模量，切线模数；正切模量；地基应力和变形切线模量

相似词语短语

modulus───n.系数；模数

tangent───n.(Tangent)（美、印度）坦根特（人名）；n.切线，切面；正切；adj.切线的，相切的；接触的；离题的

flexural modulus───挠[弯]曲模量；[力]弯曲模量；[力]挠曲模量

externally tangent───外切的

assailant tangent───攻击切线

tensile modulus───[力]拉伸模量；定伸强度；抗张模量

fineness modulus───（集料）细度模量；细度模量，细度系数

elastic modulus───弹性模数，弹性组件，弹性计量单位；弹性系数；弹性模数

tangent line───[数]切线，正切

双语使用场景

test results show that there is a linear relationship between confining pressures and initial tangent modulus.───试验发现，初始弹模与围压呈较好的线性关系。

The research results showed that specimens with higher temperatures showed higher shear strengths and Young's tangent modulus.───试验结果表明，随温度的升高，非饱和土的抗剪强度增加，初始切线杨氏模量增大。

The formulas of shear strength and Young's tangent modulus taking account of temperature were proposed.───结果建立了考虑温度影响的非饱和土抗剪强度公式和切线杨氏模量公式。

Tangent modulus theory was introduced to determine the stability capacity of this new type of composite columns subjected to axial load.───钢骨-方钢管混凝土柱是一种组合柱设计模式，采用切线模量理论对该组合柱轴向受压稳定承载力进行分析。

The test results show that there is a linear relationship between confining pressures and initial tangent modulus.───试验发现，初始弹模与围压呈较好的线性关系。

The unloading deformation modulus can be expressed as the tangent modulus at any time; and it can be obtained through the test results.───任一时间的卸荷变形模量仍可表示为切线模量，并可通过试验成果推导得出；

Nonlinear settlement computation of the soil foundation with the undisturbed soil tangent modulus method───地基非线性沉降计算的原状土切线模量法

Metallic materials--Determination of Young's modulus, chord modulus, tangent modulus and Poisson's ratio (statical method)───金属杨氏模量、弦线模量、切线模量和泊松比试验方法（静态法）

Applicability of effective tangent modulus method in evaluation of buckling strength of long-span cable-stayed bridges───有效弹性模量法在大跨斜拉桥稳定计算中应用

英语使用场景

As for the limit bearing capacity formula of the concrete filled steel tube long column subjected to axial compress , we lead to the tangent modulus and the conception of metal material .

Tangent modulus of elasticity and volume modulus of deformation increase with the reduction of water content and rapidly reduce with the increase of strain.