slip velocity发音

意思翻译

[流]滑移速度

相似词语短语

velocity───n.【物】速度

slip───abbr.串行线路接口协议，是旧式的协议（SerialLineInterfaceProtocol）；adj.滑动的；有活结的；活络的；n.(Slip)人名；(芬)斯利普；n.滑，滑倒；片，纸片；错误；下跌；事故；vt.使滑动；滑过；摆脱；塞入；闪开；vi.滑动；滑倒；犯错；失足；减退

bank slip───银行水单，兑换单

velocity profile───速度剖面（图），速度分布图，速度变化图

deposit slip───n.存款单

muzzle velocity───初速；出口速度；初速度（弹出膛时的速度）

constant velocity───常速度，等速度; 恒速；匀速；等速度；恒速度

angular velocity───[力]角速度

cratering velocity───弹坑速度

双语使用场景

distribution of slip displacement, slip velocity and friction force on the strike slip fault were obtained by numerical simulation.───通过数值计算得到了平移断层上滑移位移、速度及摩擦力的分布规律。

According to the simulation data of slip velocity and adhesion coefficient, a fuzzy model, RV-TS model, is built to describe the adhesion characteristic curve.───通过仿真实验，采集蠕滑速度和粘着系数的数据，利用RV - TS模型对粘着特性曲线进行模糊建模。

negative pressure gradient and slip velocity in standpipe increase with the increase of circulating rate.───随着循环量的增大，立管内的负压差梯度及气固相对速度也随之增大；

The difference between the mean solid velocity and mean gas velocity is called slip velocity.───平均颗粒速度和平均气体速度的差称为滑流速度。

While with the increase of the circulating amount of the system, negative pressure gradient and slip velocity in the standpipe increase too.───而随着系统循环量的增加，立管内的负压差梯度以及滑移速度均增大；

The existing of boundary slip velocity also influences the full development length of laminar flow in micro scales.───边界上滑移速度的存在，同时也影响层流流动的充分发展长度。

The kinetic characters of the material on the slip-stick conveyor are analyzed, and the average slip velocity of the material is obtained.───分析了物料在间歇滑动输送机上运动的特征，得到了物料滑动的平均速度；

Effect of different road surface, ambient temperature, contact pressure and slip velocity on friction coefficient is apprehended.───初步掌握了路面、温度、垂直压力和滑移速度等因素对摩擦因数的影响。

Maximum slip velocity between the solids and the gas is desirable for good heat transfer and intimate contact.───固体与气体之间的滑流速度应尽可能大，以实现良好的传热和密切接触。

英语使用场景

The negative pressure gradient and slip velocity in standpipe increase with the increase of circulating rate.

There were significant correlations between the dimensionless apparent slip velocity, apparent solids holdup and slip factor.

According to the simulation data of slip velocity and adhesion coefficient, a fuzzy model, RV-TS model, is built to describe the adhesion characteristic curve.