vio信息详情
abbr.虚拟输入输出（Virtualinput/output）
n.（Vio）人名；（意、罗）维奥
Each of the virtual devices point to a different VIO Server.───每个虚拟设备指向一个不同的VIO服务器。
This specialty partition provides VIO resources to clients that are using VIO servers.───这种特殊的分区向使用VIO服务器的客户机提供VIO资源。
VIO client LPARs will go to the other VIO server for their disk and network resources.───VIO客户机lpar会通过另一个VIO服务器访问磁盘和网络资源。
For instance, it is advisable, for the sake of redundancy and availability, to have at least two VIO Servers per managed frame.───例如，为了冗余和可用性起见，每个所管理的机柜至少有两个VIOServer是可取的。
VIO SCSI disks configured in the global partition can be exported to a WPAR for use as a data disk or as the rootvg for the WPAR.───在全局分区中配置的VIOSCSI磁盘可以导出到WPAR，作为WPAR的数据磁盘或rootvg。
VIO technology can help you use resources more effectively, cut down on hardware costs, and consolidate servers in new and powerful ways.───VIO技术有助于更有效地使用资源，降低硬件成本，以新颖、强大的方式整合服务器。
The resources that you assign to each VIO server should be as close to identical as possible and designed to maximize availability.───分配给每个VIO服务器的资源应该尽可能相同，提供尽可能高的可用性。
This VIO server runs a special version of the AIX operating system, with an additional software package called IOS.───VIO服务器运行AIX操作系统的特殊版本，还包含软件包IOS。
The second virtual Ethernet adapter on each of the VIO Servers must be configured as a non-trunk adapter.───必须将每个VIO服务器上的第二个虚拟以太网适配器配置为非干线适配器。
Since "hdisk0" usually contains the "rootvg" volume group, it is NOT desirable to have the primary path of "hdisk0" for all LPAR's on a managed system going through the same VIO server.
The SAS tape adapter is owned by the VIO server partition, similar to NPIV.
And, even the VIO servers can have IP addresses configured onto the SEAs for communication, bypassing the need for any sort of specialized administrative network connection.
Reboot the VIO server with the shutdown –restart command.
A VIO server must also be deployed for partitions that use Active Memory Sharing, and all I/O access needs to be virtualized by using these partitions.
If you need to add a new VLAN to an existing IVE connection, you must first logically destroy and re-create the underlying SEA device, possibly impeding any VIO client LPARs using that connection.