rotor speed发音

意思翻译

[机]转子转速；旋翼转速

相似词语短语

overlapping rotor───重叠转子

rotor blade───转动叶片，转子叶片，动叶片

speed───v.快速运动；加速；促进；（使）繁荣；超速驾驶；（非正式）用兴奋剂成瘾；n.（Speed）斯皮德（人名）；n.速度，速率；进度；迅速；繁荣；感光度；排挡；（非正式）安非他明

current speed───流速；当前速度

telegraphic speed───电报速度

Speed in───速度输入

speed trap───n.汽车超速监视区；车速监视区

rotor angle thetam───转子角θ

speed booster───冲刺能力

双语使用场景

The adjustable model contains the information of rotor speed and a current model rotor flux observer.───调模型包含电机转速的信息和一个电流模型转子磁链观测器。

Simultaneously, rotor speed can be calculated indirectly by using the position signals.───同时，利用转子的位置信号，还可以间接地计算出转速。

If the rotor speed is close to the frequency of the rotor system, the resonance phenomenon will occur.───假设转子的转速与其轴系本身的频率比较接近时，设备将会出现共振现象。

From the point of energy saving, change the rotor speed control is the most effective.───从节能角度讲，改变转子转速调节是最有效的。

Fault-tolerant control scheme for rotor speed sensor of a turbo-shaft engine and full authority digital engine control (FADEC) was studied.───以某型涡轴发动机为对象，对转速传感器失效状态下全权限数字电子控制系统（FADEC）采取的控制对策进行研究。

Then a real-time quasi-steady turboshaft twin-engined model is founded by simulating the rotor speed fluctuation.───为模拟大负载情况下旋翼转速的波动，建立了双发准定常涡轮轴发动机实时仿真模型。

The rotor speed had little effect on the residence time of the materials, and the feeding capacity wa . . .───混炼时加料量与物料停留时间成反比，转速对物料停留时间影响不大。

The creation process of Kinetic equation considers the impact of rotor speed and bearing rigidity change on the system.───动力学方程的建立过程中考虑轴承刚度变化和转子转速对系统的影响。

For the tuning, I have added an external powered DC motor, the rotor speed is measured with a hall probe and an oscilloscope.───为整，我有一个补充，外部供电的直流电动机，转子速度是衡量一个霍尔探针和示波器。

英语使用场景

Considering a critical factor - rotor speed, the system also realizes a self - adaptive process of dynamic balance test.

Finally, simulating experiment for the whole system is carried through with the stator flux-oriented vector strategy and control arithmetic of rotor speed perturb and power observation.

A fuzzy controller of rotor speed was designed of the fuzzy control method of artificial intelligence.

Secondly, the network, the rotor speed models are also introduced, and the double synchronous speed mathematical model has been deduced and set up in this paper.

The proposed method is based on low-frequency signal injection, where a low frequency stator current signal is injected and the corresponding angle error is detected to estimate the rotor speed.

The effects of different compounding conditions (rotor speed and feeding rate) on the interlamellar space and mechanical properties of the composite were analyzed.

The network, the rotor speed models are also introduced, and the double synchronous speed mathematical model has been deduced and set up in this paper.

A non-contact measuring instrument for rotor speed and its direction is introduced, which uses optics self-collimating structure, and quadrant photoelectric cell as the detector.

Main equipments: Freeze dryer, rotor speed mill, capsule production line, and sterilization antisepsis instrument.