surface mounting发音

意思翻译

表面安装；盘面安装；表面装配

相似词语短语

mounting───v.安排，组织开展，举办；增加；爬上，攀登；乘，骑（马）；镶嵌，安置（mount的现在分词）；adj.增加的，加剧的；n.支撑物，支座，底托；架设，装备

surface───vi.浮出水面；vt.使浮出水面；使成平面；adj.表面的，肤浅的；n.表面；表层；外观；n.(Surface)人名；(英)瑟菲斯

mounting pressure───越来越大的压力；日益增长的压力

mounting concerns───越来越多的关注

mounting plate───[建]安装板；装配平台；固定台；装配平台; 安装板; 固定台; 上托板

mounting hole───[机][电]安装孔；固定孔；安装孔，固定孔

mounting evidence───n.越来越多的证据

mounting block───装配台架; 装配台; 装配架; 安装台; 安装架

mounting type───安装类型；柱上式；安装形式；安装方式

双语使用场景

Compact and lightweight, High breakdown voltage, Surface mounting type.───紧凑，重量轻，高击穿电压，表面安装型。

Component mounting sequence is critical to the efficiency of surface mounting machines.───结构紧凑，重量轻，高击穿电压，表面贴装型。

In the surface mounting technology, the result of the solder printing is very big to the product quantity.───在电子装联技术中，焊膏印刷的效果对产品质量关系极大。

With the aid of uses the close microstructure the surface mounting seal single gate or the trigger then achieves the goal.───借助采用接近显微结构的表面安装型封装的单个门电路或触发器即可达到目的。

MAGNETIC COMPONENTS. SURFACE MOUNTING INDUCTORS. GENERAL REQUIREMENTS.───电子件.磁和铁氧体件.表面安装用低电感线圈.一般规定

Component mounting sequence is critical to the efficiency of surface mounting machines.───元器件贴装顺序是影响贴片机工作效率的关键因素之一。

Packaging of components for automatic handling - Part 6 : bulk case packaging for surface mounting components.───自动输送的器件的包装.第6部分：表面安装器件的散装外套封装

The surface mounting sensors have the advantage of being replaced, but they can not solve the issue of monitoring dead load stress.───表贴传感器具有可更换的优点，但不能解决恒载应力监测问题。

英语使用场景

The widely used surface mounting technology (SMT)is a advanced modern PCB electronic assembly technology.

SMT, surface mounting technology is the fourth generation of electric mounting technology.

Surface mounting technology(SMT)has found wide applications in recent years.

At present, while BGA(ball grid array) packages are widely applied to the field of microelectronic packaging, SMT(surface mounting technique) has gradually entered into the BGA package time.

Nowadays Surface Mounting Technology (SMT) is one of the most advanced electronics mounting technology.

Nowadays Surface Mounting Technology (SMT) and Chip on Board (COB) technology are playing more and more important role in packaging electronics productions.

In the surface mounting technology, the result of the solder printing is very big to the product quantity.

The methods of surface mounting technology printed circuit board (SMT_PCB) image processing , SMT_PCB soldered joint type and location information automatic gaining were introduced in this paper.

In surface mounting technology(SMT), soldered joint data information is the basis of process automation in partial reflow soldering .