surface hardness发音

意思翻译

表面硬度

相似词语短语

hardness───n.[物]硬度；坚硬；困难；冷酷

surface───vi.浮出水面；vt.使浮出水面；使成平面；adj.表面的，肤浅的；n.表面；表层；外观；n.(Surface)人名；(英)瑟菲斯

durometer hardness───[力]计示硬度

hardness tester───硬度试验机；硬度测定仪

surface data───曲面数据；表面数据；地面资料

franklinite hardness───弗兰克林硬度

brinell hardness───布里涅耳硬度；勃氏硬度；白氏硬度；布氏硬度

schist hardness───片岩硬度

hardness black───黑色硬度

双语使用场景

Diamond CVD coating process is introduced to increase the surface hardness of cutting tools.───为增加切削刀具表面硬度引入了钻石化学蒸发沉淀涂层工艺。

One simple way of describing strength is in terms of surface hardness.───描述强度的一种最简单方法是以表面硬度来表示。

Thus, these rolls require a higher surface hardness and must be hardened to a greater depth.───因此，辊子需要较高的表面硬度和较深的硬化层深度。

As the surface hardness of low carbon steel billet is rather low, when billet is blasted, pit defects will occur on its surface.───前言：低碳钢小方坯表面硬度较低，抛丸时会在钢坯表面留下“凹坑”缺陷。

The relationship between the surface hardness of ferromagnetic material and the intensity of Barkhausen noise was studied.───通过实验研究了巴克豪森噪声强度与铁磁材料表面硬度之间的关系。

By hardness analyzing, both of the two intermetallic compounds can improving the surface hardness of the basal body obviously.───通过硬度分析，金属间化合物涂层均明显的提高了基体表面的硬度。

With an appropriate filling ratio, the toughness of the products, impact-resistance and surface hardness can be significantly improved.───若填充比例适当时，制品的韧性明显改善，抗冲击性显著提高，表面硬度增强。

Thirdly, the surface hardness of the laser cladding coatings are much higher than the plasma spray welding coatings.───激光熔覆层的表面硬度也远高于等离子喷焊层。

Machine coated gloss of the surface hardness on also contributed-coating surface caused by compression tool to increase the gloss.───机上涂布的表层硬度对光泽亦有影响--涂布时的加压工具造成平滑表面，增加光泽。

英语使用场景

The plasma nitriding will improve on surface hardness and wear resistance of the piston ring.

The surface hardness of rubber object mounted on the equipment can also be tested by holding the head of the sclerometer in hand.

The surface hardness, carburized structure and thickness of the carburized layer on the TiAl-alloy obtained through the different carburization technologies was studied.

The relationship between the surface hardness of ferromagnetic material and the intensity of Barkhausen noise was studied.

The surface hardness improved greatly after multilayer film deposition.

Thus, these rolls require a higher surface hardness and must be hardened to a greater depth.

The surface hardness of medium manganese austenite steel's is increased remarkably by using the casting surface alloy.

The surface hardness medium manganese austenite steel's is increased remarkably by using the casting surface alloy.

The strength, toughness and surface hardness of medium Manganese austenitic steel have been increased greatly by casting surface alloying and complex modification.