rotation speed信息详情
旋转速度，转速；自旋马达之回转数
rotation───n.旋转；循环，轮流
rotation symmetry───旋转对称
rotation rules───轮换规则
speed───v.快速运动；加速；促进；（使）繁荣；超速驾驶；（非正式）用兴奋剂成瘾；n.（Speed）斯皮德（人名）；n.速度，速率；进度；迅速；繁荣；感光度；排挡；（非正式）安非他明
rotation axis───旋转轴，转轴；[晶体]旋转轴
rotation definition───旋转定义
rotation angle───[机]旋转角；旋转角度；回转角度
job rotation───工作轮换方法; 岗位轮换
optical rotation───旋光度，旋光性，（光学的）偏振转；[光]旋光度；[光]旋光性；偏振转
This paper presents a state space model based on spindle rotation speed for thermal errors of machine tool.───本文提出了一种基于主轴转速的机床热误差状态方程模型。
gear wheel is used to complete the rotation speed of the upper and lower rollers, but the rotation direction is opposite.───采用扇形不完全齿轮传动送料轮轴上的齿轮来完成，上、下滚轮的转速相同，但旋转方向相反。
You can base this prediction function on the speed of the object, steering or rotation speed.───你能让预报函数基于物件的速度、操纵或者旋转速度。
Therefore, it can think of that rotation speed has no effect on leakage and torque in the calculation.───因此在计算分析时可以认为转速对泵的漏失量和扭矩无影响。
The correlation between the cutting width limit and the rotation speed of the spindle in a regenerative chatter system was derived.───推导了机床再生型切削颤振系统极限切削宽度随主轴转速变化的计算公式。
Note: dribble turns, slower start, to be gradually increased after skilled rotation speed, frequency and time limited.───注意：运球转动时，开始时要慢一些，待熟练后可以逐渐提高转动速度，次数和时间不限。
Rotation speed has great effects on the flow of plastic material. With the rotation speed increases, the size of TMAZ also increases.───搅拌头的旋转速度对塑性材料的流动影响显著，随着转速的增加，热力影响区增加；
and as the double-cylinder form greatly reduces the rotation speed of the compressor, the noise of mechanical vibration is greatly reduced.───由于采用双缸形式使得压缩机的转速大幅下降，因此机械振动噪声被大幅减少。
The rotation speed can be changed according to the practical needs to meet the best separation effect.───可以依实际需要更换不同转速，以求得最佳分散效果。
However, the speed of the rotor rotation speed did not change the high magnetic field, or magnetic line of force will not be able to cut the copper.
Before the formal gelatinize also gelatinize sector rotation speed adjustment and locking.
The spiral horn of sheave and rotation speed had influence on sowing performance.
Through experiment, the relation figures of engine rotation speed, coefficient of performance of heat pump and engine thermal efficiency are presented and analyzed.
closed-loop control of rotation speed of 4 WD electric vehicle is studied.
The inner turnplate's critical rotation speed is come out by means of transmission matrix calculation, which giving a theory foundation to the crusher's improvement.
Engine tests of starting procedure control and rotation speed in closed loop have proven that the time precision and reliability of this software meet the demands of engine control system well.
The performances of the rotation speed and stall torque under different pressing forces were simulated with the iteration algorithm and MATLAB computational language.
Filling, film thickness, rotation speed and other parts are regulated centralized control unit for easy operation.