resistive load发音

意思翻译

[电]电阻负载

相似词语短语

load───vi.[力]加载；装载；装货；vt.使担负；装填；n.负载，负荷；工作量；装载量

load board───搭载基板

docker load───码头装卸工

load more───加载更多

love load───爱的负荷

load view───负载视图

course load───课程负担

bacillary load───细菌负荷

fire load───[安全]火灾荷载；燃烧负荷；燃料荷载

双语使用场景

General pulsers can obtain sharp risetime only when it is used for a resistive load.───通常的脉冲发生器只是在电阻性负载时才能得到陡的上升沿。

Resistive load, power factor: 1, special alloy resistance.───阻性负载，功率因数为1 。采用特制合金电阻。

Test by minimum Vin and constant resistive load.───测试的最低输入电压和恒定电阻负载。

Terminator A resistive load placed at the end of a cable to prevent data signals from reflecting back into the data path.───终结器就是置于电缆终端的一个电阻负荷，用来防止数据信号又反射回到线路中去。

Buffer Amplifier An amplifier , usually in a gain of 1 or 2 , used to drive a heavy capacitive or resistive load .───缓冲器放大器一种放大器，通常可以放大1到2倍，用于驱动大容量或大阻抗负载。

The result has shown witch can perfectly match any resistive load at two arbitrary frequencies.───结果显示，该阻抗变换器能在两个任意的频率点对任意电阻性负载实现理想的阻抗匹配。

Analytical Method Study on Transient Process of Resistive Load Voltage in the Rectified Filter Circuit───整流滤波电路中阻性负载电压暂态过程的解析法研究

Common Source with Resistive Load───电阻负载的共源级

英语使用场景

Buffer Amplifier An amplifier, usually in a gain of 1 or 2, used to drive a heavy capacitive or resistive load.

Resistive load, power factor: 1, special alloy resistance.

It is suggested that, with the merits of low sensitivity, the active simulation of double resistive load LC ladder filters might be a favorable scheme for high order filter realization.

A resistive load placed at the end of a cable to prevent data signals from reflecting back into the data path.

Test by minimum Vin and constant resistive load.

Feasibility of the proposed scheme is confirmed with experimental results under resistive load and rectifier load.

After introducing piezoelectric coupling to the plunge degree of freedom (DOF) in addition to two structural damping coefficients and considering a resistive load in the electrical domain, ...

The paper gives the calculated reactive compensation power and stator frequency with respect to purely resistive load and purely inductive load under constant voltage operating condition.

The resister string DAC can't directly drive resistive load, so an output buffer is needed.