resin content发音

意思翻译

[树脂]树脂含量

相似词语短语

resin───n.(Resin)人名；(俄)列辛；(法)勒森；n.树脂；松香；vt.涂树脂；用树脂处理

content───adj.满意的；n.（Content）（法）孔唐（人名）；vt.使满意；n.内容，目录；满足；容量

carbamic resin───氨基甲酸树脂

qes content───目录

acetal resin───[树脂]缩醛树脂；聚甲醛树脂；缩醛树脂，聚甲醛树脂

impregnating resin───浸渍树脂；烘干漆；填充性树脂

engaging content───引人入胜的内容

dammar resin───达玛脂

synthetic resin───n.合成树脂; 塑胶；[树脂]合成树脂，[树脂]人造树脂

双语使用场景

Treatment of ground pulp with lipase was investigated to reduce resin content of pulp.───用脂肪酶对磨木浆进行处理，以降低浆料中树脂含量。

It has some virtues such as less damages to GF, non pollutant to environment and easy control of resin content.───该工艺具有对纤维损伤小、不污染环境和树脂含量容易控制等优点。

This paper introduces an improved test of soluble resin content in epoxy preimpregnated DMD material.───本文介绍了一种改进的环氧树脂预浸DMD可溶性树脂含量检测方法。

In the case of resin content is too large to cover out of the product will not shine.───如胶量太大，覆出来的产品也会没有光泽。

Furthermore, the resin content shall not be less than 35 % by volume, and there shall be adequate adhesiveness at working temperature.───此外，树脂含量体积分数应不少于35%，而且在工作温度要有足够的粘合性。

The pulp has a comparatively high resin content, since the acid cooking liquor dose not remove the resinous matter found in the wood.───由于这种酸性蒸煮液不能去除木材中的树脂类物质，所以浆料中树脂含量相对较高。

Plastics. Phenolic moulding materials. Determination of acetone-soluble matter (apparent resin content of material in the unmoulded state).───塑料.酚醛铸模材料.丙酮溶物质的测定（非铸模状态内材料中的大致树脂含量）

A upper resin content is too large, paper distortion water absorption, guaranteed product quality, should minimize the amount of glue.───上胶量太大，纸张吸收水分而产生变形，所以在保证产品质量的前题下，应尽量减少上胶量。

The steadiness of resin content in prepreg is the key factor to ensure the quality of the finished composite.───预浸带的树脂含量稳定性是保证复合材料制品质量的重要因素。

英语使用场景

The resin content also makes them particularly glossy.

Cytec offers a range of complementary products including binder coatings, low resin content films and tackifiers.

The results indicated that the intensity ratio of beta-ray I/T0 was consistent with the resin content value.

Books and periodicals on the cohesion and effectiveness of resin content, gummed coating thickness and grooving.

Single face corrugated machine speed slow increases Corrugating cord to peak cohniiand resin content.

Its tough, flexible resin content also provides an exceptionally attractive finish.

Adhesive types, resin content, wood species and fibred form affected heat-conduction in low temperature indistinctively.

The impregnating methods concerned in this paper have the advantages such as availability for different types of resin systems, prepreg with uniform resin content and higher producing efficiency, etc.