residual magnetism发音

意思翻译

残余磁性

相似词语短语

magnetism───n.磁性，磁力；磁学；吸引力

residual───adj.（数量）剩余的；（物质状态在成因消失后）剩余的，残留的；（实验误差）舍去的，残差的；（土壤）残余的；n.（Residual）（美、阿根廷）瑞斯卓尔（人名）；n.剩余物，残渣；残差，剩余误差；（付给表演者的）复播追加酬金；（地质）残丘，蚀余山；（新车购入一定时间后的）转售值

residual definition───残差定义

magnetism quirk───磁怪癖

residual value───剩余价值；残值；残值，剩余价值

residual stress───[力]剩余应力；残余应力

residual calculator───残差计算器

residual waste───残余废物

magnetism notes───磁学笔记

双语使用场景

The opposing magnetic intensity that must be applied to a magnetized material to remove the residual magnetism.───于磁化材料以去除剩磁的反向磁通强度。

Analyzed the reason of the residual magnetism on pipe and the influence on the welding quality.───分析了钢管中剩磁产生的原因及其对焊接质量的影响。

Checking and analysis revealed at last, that it was caused by residual magnetism after repair, the polarity of which was opposite to that effected by direct current in the rofor.───在水力发电公司检修时，几次碰到发电机不能启励建压的情况，经过检查分析，最终确定为剩磁的原因，主要是检修后剩磁的极性与转子直流电产生的极性相反造成的。

The residual magnetism that remains on magnetic storage media after degaussing .───经消磁后，磁介质上残留的磁感应。

Parts which are oil wetted should also require Level 2 residual magnetism.───同样，被机油浸润过的零部件也需进行二级剩磁检测。

Residual Magnetism Effect and Site Verification of Measuring Current Transformer───测量用电流互感器的剩磁影响与现场校验

Simulation and Analysis on Error of Protective Type CT due to Residual Magnetism───剩磁对保护型电磁式电流互感器误差影响的仿真研究

Residual Magnetism for Electrical Connectors───电子连接器的残余磁力

英语使用场景

The opposing magnetic intensity that must be applied to a magnetized material to residual magnetism.

The residual magnetism that remains on magnetic storage media after degaussing .

Parts which are oil wetted should also require Level 2 residual magnetism.

Parts which are fuel wetted, do not have match-fit surface, and do not provide an unfiltered fuel path to downstream parts, should be defined as parts requiring Level 2 residual magnetism.

Analyzed the reason of the residual magnetism on pipe and the influence on the welding quality.

The opposing magnetic intensity that must be applied to a magnetized material to remove residual magnetism.

Spline function method for nonlinear inversion of 2-D single magnetic interface depth is suitable to the case where residual magnetism and induced magnetism have different directions respectively.

When possible, the fixture should be built from low-carbon steel and large masses of steel should be normalized to minimize residual magnetism.