residual austenite发音

意思翻译

残余奥氏体

残留奥氏体

相似词语短语

residual───adj.（数量）剩余的；（物质状态在成因消失后）剩余的，残留的；（实验误差）舍去的，残差的；（土壤）残余的；n.（Residual）（美、阿根廷）瑞斯卓尔（人名）；n.剩余物，残渣；残差，剩余误差；（付给表演者的）复播追加酬金；（地质）残丘，蚀余山；（新车购入一定时间后的）转售值

residual definition───残差定义

residual value───剩余价值；残值；残值，剩余价值

residual stress───[力]剩余应力；残余应力

residual calculator───残差计算器

residual waste───残余废物

residual powers───剩余动力；剩余功率

residual risk───n.剩余风险

residual income───剩余收益，剩余所得

双语使用场景

Effect of residual austenite on mechanical properties and abrasion resistance of medium Mn white cast iron was investigated.───研究了残余奥氏体对中锰白口铸铁力学性能和抗磨性的影响。

martensitic and undissolved carbide contents continuously increase as the laser scanning speed increases while the residual austenite decreases.───激光扫描速度增大，试样中的马氏体和未溶碳化物的含量不断增加，残余奥氏体含量则连续下降。

Phase transformation sequence in diffusion layer and the existence of residual austenite have great effect on the distribution of residual stress.───渗层中的相变次序和残余奥氏体的存在对残余应力分布影响较大。

the HAZ was martensite and a small amount of residual austenite.───热影响区为马氏体组织和少量残余奥氏体。

The dimensional stability of the steel is due to the control of the content of residual austenite.───尺寸稳定性的效果主要是残余奥氏体量的控制。

The amount of residual austenite in high vanadium high speed steel was measured by ferromagnetism method.───采用铁磁性法测定了高钒高速钢中残余奥氏体量。

The residual stress existed in subsurface and the amount of residual austenite were tested using XRD technique.───利用X射线衍射技术测试钢球亚表层的应力分布和残余奥氏体含量。

The tempering process and the sub-zero treatment can control the amount of residual austenite effectively.───回火和深冷处理工艺可以有效地控制残余奥氏体量。

The results show that the structure of the surfacing layer was martensite, carbides and residual austenite.───试验结果表明：焊后的堆焊层组织为马氏体+碳化物+残余奥氏体。

英语使用场景

The tempering process and the sub-zero treatment can control the amount of residual austenite effectively.

The difficulty to harden high-Carbon- Chromium contained iron is caused by the melting zone, which may bring two problems: tiny cracks and low hardness of residual austenite.

Effect of residual austenite on mechanical properties and abrasion resistance medium Mn white iron was investigated.

The martensitic and undissolved carbide contents continuously increase as the laser scanning speed increases while the residual austenite decreases.

The carbonide in the recarburized layer is mainly M23C6. The martensitic zone is composed of dislocation martensite, twinning martensite, residual austenite and a little carbonide.

The results show that the microstructure of the alloys system is the compound of the acicular martensite and partial residual austenite. From the matrix, the composite carbides were precipitated.