reset signal发音

意思翻译

复位信号

相似词语短语

signal───adj.显著的；作为信号的；n.(Signal)人名；(瑞典)西格纳尔；vt.标志；用信号通知；表示；n.信号；暗号；导火线；vi.发信号

signal wire───[通信]信号线

radio signal───无线电讯号；无线电信号

reset tooltips───重置工具提示

a reset───重置

reset drum───复位鼓

reset lockout───复位锁定

home signal───进站信号（机）；[铁路]进站信号；[铁路]进站信号机

alarm reset───报警复位

双语使用场景

memory cell and a data line are controlled with a reset signal, so that data can be reliably outputted in the semiconductor device.───存储单元和数据线用复位信号来控制，以使数据可在该半导体器件中被可靠地输出。

Internal reset signal is activated when the timer count value reaches 0 (time-out).───当定时器计数值达到0(超时)，内部复位信号有效。

In most applications, the (manual-reset) pin usually connects to a switch to create a manual-reset signal to the supervisory chip.───在大多数应用中，(手动复位)引脚通常与开关相连，为管理芯片制造手动复位信号。

A memory cell and a data line are controlled with a reset signal, so that data can be reliably outputted in the semiconductor device.───存储单元和数据线用复位信号来控制，以使数据可在该半导体器件中被可靠地输出。

The reset unit outputs the reset signal according to the outputting outer signal and the system power of the power system.───重置单元，根据电源系统所输出的外部电源信号以及系统电压大小，输出重置信号。

Function. When the timer stop, given by the switch a reset signal, made all XianShiGuan all reset.───当计时停止的时候，由开关给出一个清零信号，使得所有显示管全部清零。

英语使用场景

The reading circuit comprises at least one column amplifier (CA), and when the column amplifier is reset, a column amplifier reset signal is generated.

A memory cell and a data line are controlled with a reset signal, so that data can be reliably outputted in the semiconductor device.

While the internal reset signal is being applied to the CPU, the rate of a refresh signal being generated by a DRAM controller for refreshing data in DRAM is increased.

The schemes to dispose of reset signal and clock signal in VHDL high-level synthesis are given also.

Asynchronous reset, synchronous release of many of the specific design, the key is how to ensure simultaneous release of the reset signal.

The invention is used for regulating the time for charging the capacitor, further adjusts the maximum duty cycle of the reset signal and improves the output ripple of the buck converter.

Prior to the first level transmitted, a RESET signal shall be transmitted followed by a NULL START code.

Then, when the external reset signal is disabled, a delayed reset signal DLYRST is generated and applied to the DRAM controller so that it is reset.

The reset unit is used for determining whether to generate a reset signal according to the level of the power supply voltage when receiving the first voltage from the over-temperature protection unit.