plastic zone发音

意思翻译

[力]塑性区

相似词语短语

plastic───n.塑料；塑料学；<非正式>信用卡；adj.塑料制的；人造的，不自然的；（物质、材料）可塑的；产生立体感的；塑性的；有创造力的；适应环境变化的

Zone───n.(Zone)人名；(塞)佐内；vi.分成区；n.地带；地区；联防；vt.使分成地带；环绕

plastic films───[塑料]塑料薄膜；塑胶膜

plastic deformation───塑性变形，柔性变形；[力]塑性变形，塑性应变

plastic bottles───塑料瓶

plastic foil───塑料薄膜；塑料薄片

corrugated plastic───波纹塑料

plastic bags───塑料袋; 塑胶袋；塑料袋；塑胶袋

molded plastic───模制塑料

双语使用场景

horizontal and vertical stresses are concave upward in plastic zone.───在塑性区，水平及垂直应力均是上凹的。

material in the large plastic zone has been hardened .───在大塑性区内材料已经硬化。

No secondary plastic zone was found.───未发现有二次塑性区。

The shape of dislocation-free zone is similar to that of plastic zone.───无位错区的形状与塑性区的相似。

There is no acknowledged formulae in precisely calculating the plastic zone size when three dimensional effect has to be considered.───现阶段对于三维约束状态下的裂纹还没有一个公认的可以准确计算塑性区大小的公式。

The abruptness of the displacement in plastic zone is suggested to be used in the analysis of instability criterion.───以塑性区位移突变作为边坡失稳判据，此时折减系数值即为坡体安全系数。

The construction disturbance mainly occurs within the plastic zone with the heave of ground surface as a byproduct.───施工扰动以塑性区为主，塑性区地面发生隆起。

In this method, the elastic area and plastic zone can be distinguished and the different flow rules can be considered.───该方法可以考虑弹性区与塑性区的区别，并可以考虑不同的流动法则。

Based upon the near crack-tip elastic analysis, estimates of the size and shape of the plastic zone will be developed.───根据裂纹尖端附近的弹性分析，来估计塑性区的形状和大小。

英语使用场景

By the four boundary conditions and the method of the discrete numerical quadrature, the lengths of the plastic zone, the exit elastic zone and entrance elastic zone are calculated.

With the thickness of tensile anchor plate and the radius of plastic zone changing, the range of plastic zone and the magnitude of yield load are investigated.

There is dislocation - free zone around the crack tip which has similar shape as the plastic zone.

In terms of the role of interface layer, when the crack propagates from the stiffer side, the interface plastic zone is larger, tends to delaminate .

The main speed of laser welding is very fast and the plastic zone is considerably narrow.