plasma arc发音

意思翻译

等离子弧，等离子体电弧；电浆弧

相似词语短语

plasma───n.[等离子]等离子体；血浆；[矿物]深绿玉髓

arc───n.弧（度）；弧光（全称electricarc）；弧形物；天穹；vt.形成电弧；走弧线；n.(Arc)人名；(法)阿尔克；adj.圆弧的；反三角函数的

arc flash───电弧闪光

jerboa arc───跳鼠弧

plasma membrane───质膜；浆膜（等于cellmembrane）

donating plasma───捐献血浆

plasma cells───[医] 浆细胞；n.[组织][细胞]浆细胞；原生质细胞

fordo arc───福尔多弧

refract arc───折射弧

双语使用场景

The system can not only be used in pulse plasma arc welding, but also can be used in penetration controlling in plasma arc welding.───该系统不仅可以进行脉冲等离子弧焊接，而且可以实现脉冲等离子弧焊接的熔透控制。

Ordinary plasma arc cutting machine power supply.───普通等离子弧切割机的电源。

Sometimes nitrogen are being used oxygen plasma arc cutting of arcs gas.───有时氮气还被用作氧等离子弧切割时的起弧气体。

Many current flow through the law of metals also can be used for plasma arc.───许多电流流过金属的规律也可用于等离子弧上。

This current rapidly heats up the fill material generating a plasma arc between the electrodes.───这个电流会迅速的激发管内的填充物，在两个电极产生等离子弧。

Heat source device with plasma arc quenching is of great capacity for its high thermal efficiency and low cost.───等离子弧淬火热源装置热效率高，成本低，有巨大的发展潜力。

So it appears to be particularly important to diagnose the thermodynamic parameters of plasma arc controlled by magnetic field.───因此，对磁控等离子体弧热力学参数的诊断就显得尤为重要。

plasma arc voltage feedback, position feedback, automatically shut down arc voltage in the corner.───等离子弧压反馈，定位反馈，转角自动关闭弧压调高。

It reveals the relationship between the weld quality and the matching of parameters in plasma arc welding process .───从等离子电弧力的角度，探讨了等离子弧焊接工艺参数及其匹配的内在联系与规律性。

英语使用场景

This text introduces the technologic point of plasma arc welding for high temperature alloy, aluminium and aluminum alloy, titanium and titanium alloy, argentum , platinum, etc.

By using plasma arc method a copper base alloy surfacing weld was formed on steel Q235, with Sn P bronze powder with nickel base alloy powder.

In the present study, tungsten oxide nanorods were prepared by a plasma arc gas condensation technique where a gas nozzle was introduced to provide blowing gas.

By comparing backgouging of plasma arc with carbon arc to the welded joint of 13-5 martensitic stainless steel, the backgouging of plasma arc is proved feasible for the full penetration weld.

A non power supply probe was developed to detect the plasma cloud voltage, which consists of plasma arc voltage gradient and plasma sheath voltage.

The cutting quality of numerical control plasma arc cuffing machine means the gradient and the smooth of cuffing side.

But the argon plasma arc voltage, low enthalpy is not high, cutting ability is limited, and cut the air than the thickness of the cut about 25% lower.

Micro - plasma arc welding technique has a good application prospect for oral cavity repair.

The range which is cleaned up by Plasma arc became small, it tend to format oxidate slag.