maximum deviation发音

意思翻译

[物]最大偏差

最大误差

相似词语短语

maximum───adj.最高的；最多的；最大极限的；n.[数]极大，最大限度；最大量

deviation───n.偏差；误差；背离

deviation definition───偏差定义

maximum power───[化] 最高功率；[电]最大功率；最高功率

deviation mean───偏差平均值

deviation calculator───偏差计算器

absolute maximum───最大绝对值

maximum height───最大高度

consummation deviation───完成偏差

双语使用场景

Besides a comparison of the characteristic line, the normalized mean square root error, the normalized mean error, and the maximum deviation are calculated and discussed.───除了用单行数值比较法外，还计算了重组和数学模型之间的归一化均方根偏差、归一化平均偏差和最大偏差。

To compare with maximum deviation method and region growing method, some results of segmentation were given. The results show that the proposed method is more effective.───将该方法与最大方差法和区域增长法进行比较，通过实例表明该方法的有效性。

experiment shows that the calculator values from the model agrees well with the experiment data and the maximum deviation is within 30%.───实验表明模型计算值和实验数据吻合较好，最大偏差在30%以内。

Results of improved determination method were compared with that of primary method with maximum deviation of 0. 1%.───改进前、后方法测定结果比较，相对偏差最大值为0.

Furthermore, the calculated and measured optical density distribution is in good agreement with a maximum deviation of less than 10%.───此外，计算和测量光密度分布是吻合的最大偏差小于10%。

The agreement of simulation and theoretical calculation results with each other is fairly good, maximum deviation being less than 5%.───模拟计算结果与理论计算结果的数据拟合程度较好，最大偏差不超过5%。

The experiment shows that the calculator values from the model agrees well with the experiment data and the maximum deviation is within 30%.───验证实验表明模型计算值和实验数据吻合较好，最大偏差在30%以内。

The maximum deviation of temperature between model prediction and experimental testing is about 3. 3K, and average deviation is about 0. 5K.───并且界面处温度的模型预测值与实验测试值之间最大偏差约为3.3K，平均偏差约为0.5K左右。

Maximum Deviation and Entropy Method for Design Proposals Optimization───设计方案优选中的离差最大化及熵值法

英语使用场景

Best-fit curves, which can minimize the maximum deviation, should be used to evaluate the independent conformity of instruments and transducers.

The maximum deviation of temperature between model prediction and experimental testing is about 3.3K, and average deviation is about 0.5K.

To compare with maximum deviation method and region growing method, some results of segmentation were given. The results show that the proposed method is more effective.

Besides a comparison of the characteristic line, the normalized mean square root error, the normalized mean error, and the maximum deviation are calculated and discussed.

According to multiindex characteristics of appraised design proposals, the rational weight coefficient among them is given by using the comprehensive appraisal value of maximum deviation and entropy.

The standard deviation and the maximum deviation between the experimental results and the calculated ones from the viscosity equation of saturated liquid are 0.58% and 2.10%, respectively.