rolling temperature信息详情
轧制温度
rolling───n.旋转；动摇；轰响；adj.旋转的；起伏的；波动的
temperature───n.温度；体温；气温；发烧
high rolling───高速轧制
keep rolling───保持滚动
rolling days───滚动日
rolling mill───轧钢厂；辊轧机；n.轧钢厂
rolling plane───轧制平面，横倾平面，滚动面
critical temperature───[物][电子]临界温度；n.临界温度
temperature outside───室外温度
self-learn algorithm of the first the second start rolling temperature and is presented.───提出一次开轧温度和二次开轧温度的自学习算法；
influence of hot rolling temperature on coefficient of friction is studied in laboratory.───在实验室条件下，对热轧时温度对摩擦系数的影响进行了试验研究。
The results indicated that increasing the deformation and a proper rolling temperature may improve obviously the bonding strength.───研究表明，增加变形程度和选择合适的轧制温度能提高复合板的界面初结合强度。
With the decrease of finishing rolling temperature, the grain size is refined apparently and the contents of sorbite is increased.───随着终轧温度的降低，热轧材组织得到细化，索氏体含量提高。
The outcome shows that the said rupture is caused by rather low final rolling temperature.───结果表明，冷弯制断裂属于终轧温度偏低所致。
In this paper, different hot rolling processes, such as rolling temperature and rolling strain, were applied to change the final textures.───本文通过设定不同的轧制温度、压下量等热轧工艺，得出几种主要织构组分的变化趋势。
Technological Experiment on Production of High Pressure Boiler Pipe With Final Rolling Temperature Controlled───控制终扩温度生产高压锅炉管的工艺试验研究
The Calculus of Variation Used in the Calculation of H-Beam Universal Rolling Temperature───变分法在H型钢万能轧制温度计算中的应用
Application of artificial neural network in prediction of the hot strip rolling temperature───人工神经网络在热轧温度预报中的应用
The mathematical model in heating furnace is set up for calculating billet tapping temperature according to billet heterogeneity, specification and opening rolling temperature.
High finish rolling temperature promotes the recrystallization of hot-rolled strip, increases favorable texture components, decreases the core loss, and increases magnetic induction of final product.
With the decrease of finishing rolling temperature, the grain size is refined apparently and the contents of sorbite is increased.
The stability of the retained austenite is increased with decreasing finishing rolling temperature and increasing finishing rolling reduction rate, causing satisfactory TRIP effect.