polymer flooding发音

意思翻译

聚合物驱

相似词语短语

flooding───n.泛滥；产后出血

polymer solution───聚合物溶液；高分子溶液

flooding toilet───抽水马桶

amorphous polymer───非晶态聚合物

from flooding───从洪水中

branched polymer───支链型高分子，[高分子]支化聚合物；分支聚合物

flocculating polymer───絮凝聚合物

synthetic polymer───[高分子]合成聚合物；合成高分子

polymer clay───软陶

双语使用场景

The experiment manifests that high concentration polymer flooding is a good way to enhance oil recovery.───实验表明，采用高浓度聚合物驱油是一种较好的提高原油采收率的方法。

By limited difference method, two dimensional, two phase polymer flooding numerical model is built.───并通过有限差分方法，建立了二维两相聚合物驱数值模型。

Cycle polymer flooding method can reduce injection pressure.───周期注聚方式可以降低注入压力。

Spontaneous emulsification flooding efficiency is better than those of surfactant flooding and polymer flooding.───自发乳化驱油效果好于表面活性剂驱及聚合物驱。

Technology and methods set out in the mine has guiding significance to carry out polymer flooding.───阐述的技术与方法对矿场开展聚合物驱具有指导意义。

The suggestion of the performance index is of value to polymer flooding for high-temperature and high-salinity reservoirs.───该性能指标的提出对国内外高温高盐油藏进行聚合物驱油具有重要的指导意义。

permeability and viscoelasticity of polymer solution to the shape and characteristic of the relative permeability curve in polymer flooding.───研究了岩心润湿性、渗透率和聚合物溶液粘弹性对聚合物驱相对渗透率曲线形状和特征的影响。

This study shows that the main remaining potential after polymer flooding lies in thick layers with intermediate permeability.───分析认为，中等渗透率厚油层是聚合物驱后剩余油主要潜力所在。

At last, evaluating the effect of polymer flooding through the mine sites life of pilot in region of interest.───最后通过研究区的矿场先导性实验对聚合物驱的效果进行了评价。

英语使用场景

After polymer flooding and polymer cross link micro gel flooding, the residual oil mainly distributes in middle and low permeable reservoirs. This is the potential area of EOR.

For polymer flooding system, Demulsifier selection is dependent on polymer concentrations in produced liquid.

The way to improve the effect of polymer flooding mainly depends on increasing the viscosity of polymer solution and the ability to establish the residual resistance factor.

The necessary conditions of the OCP for polymer flooding were deduced by using calculus of variations. Both continuous and discrete cases are studied.

Taken polymer flooding units in Shengli oilfield as prototype model is built and 15 dynamic influential factors and influential rules in polymer flooding are discussed.

The technology of organic cross-linked polymer flooding is studied according to the need of recoverable reserves increase in high temperature and high salinity oil reservoirs.

Inpouring polymer flooding is one important process to enhance oil recovery.

The ultimate oil recovery after polymer flooding is almost 50%. A half geological reserves remaining oil can not be swept and driven by water flooding.

Polymer flooding technics can stabilize crude oil output, but it also increases the difficulty of crude oil demulsification and sewage treatment.