polymer concentration信息详情

polymer concentration发音

意思翻译

聚合物浓度

相似词语短语

concentration───n.浓度;集中;浓缩;专心;集合

impurity concentration───[电子]杂质浓度

polymer solution───聚合物溶液;高分子溶液

amorphous polymer───非晶态聚合物

high concentration───高浓度,高强度

branched polymer───支链型高分子,[高分子]支化聚合物;分支聚合物

concentration curl───[体]单臂哑铃弯举

flocculating polymer───絮凝聚合物

synthetic polymer───[高分子]合成聚合物;合成高分子

双语使用场景

experimental results show that the mechanical strength is increased with increasing the polymer concentration and the freezing time.───结果表明,其机械强度随凝胶浓度和冷冻时间的增加而增强。

of the polymer concentration enlarges its hydrodynamics radius, resulting in the increase of the thickening property.───聚合物的浓度越大,其表观流体力学半径就越大,从而造成其增粘能力越强。

The thickness of depleted formation has a little change when the polymer concentration is lower.───在聚合物浓度较低时,衰竭层厚度变化不大;

For the higher polymer concentration solution, approached the maximum viscosity required more amount of surfactant.───聚合物质量分数越高,达到最大黏度值所需的表面活性剂的量也越大。

Polymer concentration and effect of foam power are tested in the lab.───对聚合物浓度与发泡能力的影响也进行了室内研究;

The membrane thickness and rejection ratio increased whereas porosity and water flux decreased with polymer concentration increased;───随固含量增加,膜厚度增加,孔隙率降低,水通量减小,截留率升高;

A method for accurate determination of polymer concentration in produced fluid of oil well by polymer flooding───聚合物驱油井产出液中聚合物浓度的准确测定方法

Grey Prediction Control in the Polymer Concentration───聚合物配置浓度控制中的灰色预测控制

英语使用场景

Increasing polymer concentration for either alkali-surfactant-polymer main slug or auxiliary slug will significantly improve the incremental oil recovery.

The optimum polymer concentration therefore that would yield the best compromise between total glucose availability and low osmolality remains to be determined.

Between these parameters, the stirring speed and the polymer concentration were found to influence positively or negatively, respectively, the MNP size which varied between 320 and 1500nm.

Increasing polymer concentration of either alkali-surfactant-polymer main slug or auxiliary slug will significantly improve the incremental oil recovery.

When polymer concentration in higher than the critical aggregation concentration, the intermolecular hydrophobic ass.