molar ratio of信息详情
摩尔比
molar ratio───n.摩尔比率,摩尔浓度;克分子比,克分子比率
molar───adj.(与)质量(有关)的;摩尔的;臼齿的;磨碎的;用于研磨的;体积可分子浓度的;n.臼齿,磨牙
ratio───n.比率,比例
molar mass of water───水的摩尔质量
molar mass of carbon───碳的摩尔质量
molar pregnancy───葡萄胎妊娠
chipped molar───有缺口的臼齿
variation ratio───异众比率;变异比率;变速比,变速范围
molar concentration───体积摩尔浓度;摩尔浓度,容积克分子浓度,容模浓度
of molar ratio of pentamer to pyridine and products structure is studied.───研究了五聚体与吡啶的摩尔比与产物的结构的关系。
influence of reaction time, temperature, pressure, and molar ratio of methanol to soybean oil were discussed.───讨论了不同的反应时间、温度、压力及摩尔比对大豆油转化率的影响。
effect of molar ratio of reactants and reactive temperature on the yield of product is investigated.───考察了反应物投料摩尔比和反应温度对产物收率的影响。
Holographic properties of a series of samples with different molar ratio of dual monomers were measured and analysed.───初步测定了不同摩尔配比条件下材料的全息存储性能,分析了其中的影响因素。
After single factor optimization, temperature, catalyst amount and molar ratio of methanol to oil were the important factors.───在单因素优化的基础上,确定反应温度、催化剂用量及醇油摩尔比等为显著影响因素。
Effects of reaction temperature, agitation speed, reaction time, catalyst loading and molar ratio of water to cyclohexene were investigated.───探讨了反应温度、搅拌速度、反应时间、催化剂用量和原料摩尔配比对反应的影响。
The effects of catalyst and its amount, temperature, reaction time and molar ratio of the raw material on the reaction were studied.───通过试验考察了催化剂及用量、反应温度、反应时间及物料配比等因素对反应的影响。
The investigated effects conclueded amount of the catalyst, reaction time, molar ratio of alcohol to acid and repeated uses.───考察了催化剂用量、醇酸物质的量比、反应时间及催化剂重复使用次数等因素对收率的影响。
The results showed that the reaction time was prolonged with the molar ratio of acrylic acid increasing.───结果表明:随着反应物中丙烯酸含量的增加,反应时间延长。
The effects of molar ratio of primary materials, temperature and time of reaction on the yield were examined . The optimum conditions of the synthesis were determined.
The influence of the molar ratio of n-amyl alcohol and acetic acid , the quantity of the catalyst , the reaction time etc on the ester yield was discussed .
The effects of catalyst amount, reaction time, molar ratio of sec-butanol and acetic acid, and amount of deaquation reagent on the reaction were studied.
When the molar ratio of the rare earth ion and MP-11 is increased to the certain extent, the interaction would destroy the regular structure and inhibit the electrochemical reaction of MP-11.
C, AS - 2 is Composed Ara, Xyl, Rha , Gal, Glc, with the molar ratio of 1.6:1.2:1.8:1.0:3.6 aespectively.
The optimal molar ratio of TEPA to ECH was 1:1.5.
As the molar ratio of TDI to polyols was fixed at 2.1/1, relative more excess TDI was applied for 20 based copolymers which would cause more allophanate crosslinks.
The optimal molar ratio of CH _ 3 CH ( OH ) CH _ 2 OCH _ 2 CCH _ 2 OH to CH _ 3.
The reaction of molar ratio of pentamer to pyridine and products structure is studied.
- put on music
- keep cool and carry on
- museum square
- people worldwide celebrate
- openworld absolut
- put on my clothes
- priority unit
- pitch into
- priorityblockingqueue
- methane indicator
- mate xs
- keep confident
- incremental dimension
- neophoto
- love of life ppt
- keep count
- mainstadium
- oh she stay the cycle
- pollutant concentration
- live it to me
- live it to the full