non-conductive信息详情

non-conductive发音

意思翻译

非导电的

相似词语短语

conductive───adj.传导的;传导性的;有传导力的

non───adv.非,不;n.(Non)(美、泰)嫩(人名)

conductive adhesive───[胶粘]导电粘合剂

conductive paint───[化] 导电涂料

conductive pigments───导电颜料

conductive foam───导电泡沫

conductive deafness───传导性聋

non statement───非声明

non sequitur───不合理的推论或结论;n.<拉>不合逻辑的推论

双语使用场景

It is non-conductive and does not require a burn-in time to achieve maximal efficiency.───它是不导电,不需要老化时间实现最大的效率。

Insulation Insulation is non-conductive material used to prevent leakage of electric current from a conductor.───绝缘绝缘体就是非导电材料,用来防止导体中电流的泄露。

The detection feature can be switched off when testing EUT's with non-conductive surfaces, such as plastic housings.───当测试表面无导电材料的被测件如塑料外壳时,该检测功能可关闭掉。

Aldrin relied on a felt-tip marker, since the non-conductive tip would close the contact without shorting it out, or causing a spark.───奥尔德林当时使用的是毡制粗头笔,它的尖头是不导电的,接触开关不会造成短路或引发火花。

When a voltage is applied in a second direction, the ion bridge recedes and the programmable resistor becomes essentially non-conductive.───当电压沿第二方向施加时,离子桥消失且可编程电阻器变得基本不导电。

Made of high-density polyethylene that's lightweight, non-conductive, and non-corrosive.───由高密度聚乙烯制成,重量轻、不导电、无腐蚀性。

The jack housing includes an electrically non-conductive substrate metallized with a metal shield layer.───插座外壳包括利用金属屏蔽层进行金属化的不导电衬底。

Non-conductive mats should be placed in front of the switchboards and maintained in a clean condition.───闸刀盒前边要放绝缘垫,并保持干净。

英语使用场景

In the isolated state gallium salt and organic compounds are non-conductive but Hla and his colleagues have evidence that these two substances formed by the metal lines are superconducting properties.

A cost effective alternative requiring less expensive fabrication, infinitely mouldable polyurethane is also suited to applications requiring non-sparking and non-conductive material.

SprayCool patented two-phase liquid cooling technology uses a fine mist of non-corrosive, non-conductive liquid, sprayed in a thin layer, which evaporates and cools electronics.

It is non-conductive and does not require a burn-in time to achieve maximal efficiency.