incomplete fusion信息详情
未焊透，不完全焊透；[核]未完全熔合
fusion───n.融合；熔化；熔接；融合物；[物]核聚变
incomplete───adj.不完全的；[计]不完备的
inertial fusion───惯性聚变
tribal fusion───部落融合
incomplete parameter───参数不完整
incomplete plosion───不完全爆破
fusion food───融合菜；无国界料理
fusion reactor───聚变反应堆，热核反应堆，核聚变反应堆
attacker fusion───攻击者融合
Incomplete fusion prevent adopting greater welding current, use correctly to weld the cleaning of operating, notice groove position.───未熔合的防止采用较大的焊接电流，正确地进行施焊操作，注意坡口部位的清洁。
Lastly, it is stressed that the defect of incomplete fusion has the greatest impact on the welding quality.───最后强调以未熔合缺陷对焊接质量影响最大。
weld defects of incomplete fusion and burn through always occur when the electro-slag welding is used between the outside thin metal plate and the inner clapboard in a box-section member.───截面构件薄壁板与内隔板电渣焊接时，易产生壁板烧穿和焊缝未熔合现象。
C , . Incomplete fusion prevent adopting greater welding current, use correctly to weld the cleaning of operating, notice groove position.───未熔合的防止采用较大的焊接电流，正确地进行施焊操作，注意坡口部位的清洁。
Furthermore, the zinc evaporating and oxidizing cause air bubble, incomplete fusion and crack.───锌挥发和氧化会导致气孔、未熔合及裂纹。
In order to identify splashing and incomplete fusion, build the defect identification system.───构建缺陷识别系统，识别焊点是否存在喷溅或者未熔合缺陷。
Sometimes there are other defects in the joints such as solid inclusion, incomplete fusion and penetration, undercut.───另外，在有些情况下还容易产生夹杂、未熔合和未焊透、咬边、下塌等缺陷。
Weld discontinuity causes and remedies-incomplete fusion───未熔合导致的焊缝的不连续的返修
Control of special root incomplete fusion flaw produced by fibrin root welding───纤维素根焊特殊根部未熔合缺陷的控制
Furthermo re, the zinc vaporating and oxydizing cause air bubble, incomplete fusion and cr ack.
Furthermo re, the zinc evaporating and oxidizing cause air bubble, incomplete fusion and cr ack.
A congenital fissure in the roof of the mouth, resulting from incomplete fusion of the palate during embryonic development. It may involve only the uvula or extend through the entire palate.