penetration depth信息详情
[电子][制冷]穿透深度;有效肤深
penetration───n.渗透;突破;侵入;洞察力
depth───n.[海洋]深度;深奥
great depth───大纵深;大深度
penetration rate───穿进速率,焊透率;焊透率;[机]穿进速率;进尺速度
penetration pricing───渗透定价法
midship depth───船中深度
axially depth───轴向深度
moulded depth───[船]型深;模深
total depth───全深比;全齿高
The maximum penetration depth of gas flow is increased with the increase of gas momentum while the diameter of oxigen gunjet keeps constant.───气流的最大穿透深度随气体动量的增加而增加,而氧气喷枪的直径保持恒定。
overall stability of structure depends on the accuracy of penetration depth and internal stress.───的入土深度和内力是否准确关系到整个码头结构的稳定性。
The regression of the experimental data yields the correlation of jet penetration depth.───最小二乘回归,得到了射流深度的关联式。
The total penetration depth on per unit area was not sensitive to the charge ratio, only slightly increasing as the charge ratio increased.───纸靶单位面积上的总穿深对装药比不敏感,随装药比的增大略成线性增大的趋势。
Penetration depth was a function of dielectric property positively correlated with temperature.───穿透深度是介电性质的函数,与温度呈正相关。
According to the adhesive paper between the penetration depth and the cutin of thickness, it also bond rate of wood are the same.───根据胶粘剂在纸张之间渗入的深度及所形成胶膜的厚度不同,其粘结率度也木相同。
The penetration depth shall not be evaluated but the joint must be welded without any lack of fusion.───不评估熔深,但焊缝必须完全熔合,没有虚焊。
to the relatively small thermal penetration depth within the workpiece and the continuous removal of grinding chips.───由于在工件内相对较小的热渗透深度和不断去除的磨削碎片
The penetration depth decreases with the increase of initial attack angle at the same velocity, which appears a linear relationship.───相同速度下,随着初始攻角的增大侵彻深度变小,基本呈线性关系。
- penetration descent
- main brace
- littleghost
- nominal expenditure
- love is dying
- master training classes
- master transmitter
- metallic poisons
- modular development
- katyusha
- main branch
- iwantmoneybbb
- open the bottle with the opener
- iwantmore
- include involve
- love is ecstasy
- la rosalia
- nominal flow capacity
- negative interest
- p h o n g
- open the box and see