metal thickness发音

意思翻译

金属厚度

相似词语短语

sheet metal thickness───金属板厚度

thickness───n.厚度；层；浓度；含混不清

corneal thickness───[医]角膜厚度

slice thickness───[医]层面厚度

cornea thickness───角膜厚度

thickness gauge───厚薄规，测厚仪；厚度计

girdle thickness───腰厚度

coating thickness───[电] 涂膜厚度

metal───vt.以金属覆盖；n.（Metal）（捷、瑞典）梅塔尔（人名）；n.金属；合金；adj.金属制的

双语使用场景

The result showed that notch was disadvantageous to the strength of joints, and the optimal value of filler metal thickness existed.───结果表明，钢体上开工艺槽导致焊后残余应力增加， 对接头强度不利；钎缝厚度存在一最佳值。

Sedimentary speed: unit time parts deposition on the surface of the metal thickness.───沉积速度：单位时间内零件表面沉积出金属的厚度。

effects of joint shapes and filler metal thickness on the distribution of residual stress were researched.───研究接头形状、钎缝厚度对焊后残余应力的大小及分布规律的影响。

The effects of joint shapes and filler metal thickness on the distribution of residual stress were researched.───研究接头形状、钎缝厚度对焊后残余应力的大小及分布规律的影响。

Burr height can't exceed 5% of metal thickness and burr side to be inside.───毛刺高度不可超过材料厚度5%，并且毛刺方向向内。

For Combination Qualification, The Deposited Weld Metal Thickness Shall Be Recored For Each Filler Metal Process Used───对于组合评定，应记录每种填充金属或焊接工艺和熔焊焊缝金属厚度。

Test method for vacuum-deposited metal thickness--Electric resistance method───真空金属镀层厚度测试方法电阻法

Thinning Ratio Analysis of Sheet Metal Thickness───材料变薄率分析

英语使用场景

Large (. 25" high), easy to read 6-digit non-resettable totalizing counter. Provides precise indication of current consumed. Ideal for metal thickness control monitoring."

It is shown that the metal thickness effect on the Q-factor depends on the diameter of the innermost turn in a planar spiral inductor.

General note:The "Thickness of Weld Metal" is the total weld metal thickness deposited by all welders and all processes in the test coupon exclusive of the weld reinforcement.