pipe body发音

意思翻译

管体

相似词语短语

pipe───vt.用管道输送；尖声唱；用管乐器演奏；n.(Pipe)人名；(匈)皮佩；(英)派普；n.管；烟斗；笛；vi.吹笛；尖叫

body body───身体

tail pipe───n.排气尾管

body───n.(Body)人名；(英、法、罗)博迪；vt.赋以形体；n.身体；主体；大量；团体；主要部分

ferruled pipe───套圈管

pipe stem───管柱

steel pipe───[材]钢管

pipe dream───白日梦，空想；n.白日梦，幻想

main pipe───总管；主管道；[机] 总管; 主管道

双语使用场景

Notethe coating thickness of weld seam should be not less than 80% of coating thickness on pipe body.───焊缝处的防腐层厚度，不得低于管本体防腐层规定厚度的80%。

In viewing the detection missing of holes in pipe body in the detection of defects at present a kind of remedy measures are put forth.───针对目前钢管探伤中管体孔洞漏检问题提出了一种补救措施。

tensile strength(UTS) both in transverse and longitudinal of pipe body showed the trend for rising.───纵向的屈服强度及其屈强比均有上升趋势； 钢管母材横向和纵向抗拉强度都呈上升趋势。

the resin can be stirred and mixed by rotating the swallowtail-shaped mixing board on the top of the pipe body.───转动管体其顶部的燕尾状搅拌板即可搅拌树脂使之混合。

The spray pipe is a ring hollow pipe body, and the through spray orifices are alternatively distributed around the spray pipe.───所说的喷管为环形中空管体，贯通的喷孔沿喷管的圆周间隔分布。

The front end edge portion 4 is formed by inwardly pressing and deforming the front end portion of the pipe body 2.───前端边缘部分四是由内心冲压变形的管身前端部分2。

It was measured by using flattened plate sample generally, so in fact it is not the true yield strength of the pipe body.───通常采用压平的板状试样来测定钢管的屈服强度，所测屈服强度并非钢管的真实屈服强度。

API regulates that the yield strength of flatten specimen from pipe body is used to characterized the yield strength of oil pipeline body.───根据美国石油学会API标准规定，采用管体取样压平试样的屈服强度表征输油管体屈服强度。

the sealing ring is embedded into the tube coupling to prevent the screw threads of the pipe body and the coupling from being eroded.───管接箍内嵌入密封环可防止管体螺纹和接箍的腐蚀；

英语使用场景

The ultimate tensile strength(UTS) both in transverse and longitudinal of pipe body showed the trend for rising.

The front end edge portion 4 is formed by inwardly pressing and deforming the front end portion of the pipe body 2.