peel strength发音

意思翻译

剥离强度

相似词语短语

strength───n.力量；力气；兵力；长处

peel p50───剥p50

shear strength───切变强度

chemical peel───化学换肤；化学剥脱术；[医]化学脱皮术

sapped strength───磨损强度

for peel───对于剥离

lemon peel───柠檬皮

phenol peel───苯酚皮

peel case───果皮盒

双语使用场景

strength between aluminium and the grafted polyethylenes was measured .───酸酐功能化的聚乙烯与铝的粘结强度最高。

effect of different surface treatment on peel strength of substrate has been investigated.───研究了不同的表面处理方法对基板金属化剥离强度的影响规律。

effect of the residual stress on the peel strength P/b is discussed.───结果还表明，膜内残余应力的存在降低了剥离强度。

This article, the most common difference Peel strength as an example, jointly conducted analysis with you.───本文，就以最为常见的剥离强度差为例与大家共同进行分析探讨。

With polyether polyurethane as the main body the hot melt adhesives has good flexibility, poor adhesive peel strength and heat resistance.───以聚醚为主体的聚氨酯热熔胶虽然柔韧性得到改善，但胶黏剂的剥离强度，耐热性又较差。

In the case of composite materials, the Peel strength is an important quality metrics.───对于复合材料而言，剥离强度是其重要的质量评价指标。

Aerospace. Thermosetting resins, prepreg based composite materials. Peel strength.───航空和航天.热固性树脂预浸合成材料.耐剥离强度试验

However, polyethyleneimine wet peeling strength and resistance to deformation of the peel strength are poor.───但是，聚乙烯亚胺的耐湿剥离强度和耐残余变形的剥离强度较差。

there will be a small amount or a large number of solvent residue in printing ink layer, by may cause complex hierarchical to peel strength.───不当的话，就会有少量或较大量的溶剂残留在油墨层中，复合后可能会造成复合膜的分层，使剥离强度变差。

英语使用场景

The effects of N-methyl pyrrolidinone(NMP) on viscosity and stability of aqueous polyurethane emulsion, water absorbing ratio, contacting angle of glue film and T peel strength were studied.

High Copper Peel Strength and Excellent Alkaline Resistance.

The reason why A have a low peel strength is the lower cohesive energy of A.

Tightsen structural adhesives have excellent tensile, shear and peel strength maximum impact stress and vibration resistance.

In the case of composite materials, the Peel strength is an important quality metrics.

The adhesive is nontoxic and has excellent peel strength to SBS materials and leather.

Waterborne acrylic pressure - sensitive adhesives ( PSAs ) with low peel strength were prepared by the semi - continuous emulsion polymerization.

The adhesive technique with great cohesion and peel strength.

This article, the most common difference Peel strength as an example, jointly conducted analysis with you.