mass transfer coefficient发音

意思翻译

[化工]传质系数；[流]质量传递系数

相似词语短语

mass transfer───[热]质量传递，[化工]传质；[物]质量转移；质量传递[转移]，传质

coefficient───adj.合作的；共同作用的；n.[数]系数；率；协同因素

heat and mass transfer───传热与传质；热质量转移

transfer───v.转让；转接；移交；转移（地方）；（使）换乘；转存，转录；调动（工作）；传染，传播；使（运动员）转队；把（钱）转到另一账户，机构上；n.（地点的）转移；（工作的）调动；已调动的人或东西；权力的移交；运动员转会；（公共汽车、飞机等的）转移；（财产的）转让；数据的拷贝；图画，图案；转车票

diffusibility coefficient───扩散系数

mass───n.块，团；群众，民众；大量，众多；质量；vt.使集合；adj.群众的，民众的；大规模的，集中的；vi.聚集起来，聚集

convective coefficient───对流系数

coefficient meaning───系数含义

coefficient analysis───系数分析

双语使用场景

Drop diameter distribution and mass transfer coefficient are briefly introduced.───对滴径分布和传质系数也作了简单介绍。

mass transfer coefficient was higher for the big porosity membrane than for the small porosity one at same experiment condition.───同一传质体系，在相同流动条件下孔隙率大的膜的传质系数大于孔隙率小的膜的传质系数。

The mass transfer coefficient in cyclone reactor was studied.───对旋流反应器的传质系数进行了研究。

The mass transfer coefficient and drop of pressure in wet curtain are measured by means of counterflowing. Two formulas are obtained.───用气水逆流接触法测定了湿帘中的传质系数和压降，得到关联式。

Upon the numerical results of the gas phase and the dispersed liquid flow, the mass transfer coefficient of the liquid phase is obtained.───在对气液两相流体流动进行了数值模拟的基础上，计算了液滴相的传质系数。

Of all the process parameters, liquid phase temperature and air flow rate were the main factors affecting the mass transfer coefficient.───在氨的吹脱过程中，液相温度和空气流量是影响吹脱过程中氨体积传质系数的主要因素。

Experimental results show that the volumetric mass transfer coefficient increases with the liquid and gas fluxes.───实验结果表明，多级雾化超重力旋转床气液两相间的体积传质系数随气液流量的增加而增大。

and the effects of enhancement decreases with a relative high mass transfer coefficient in pure water.───当气体在纯水中的传质系数增大时，同等条件下分散相对气液传质的增强作用减小。

Overall mass transfer coefficient can be increased with the increase of CO2 concentration.───提高气相CO2浓度能够提高总传质系数；

英语使用场景

Mathematical model was proposed to determine rate constants of ozone self-decomposition in water and mass transfer coefficient of ozone.

Through the analyse and mathematical treatment, the equation of the adsorption capacity and the apparent mass transfer coefficient are obtained.

The calculation of height of mass transfer zone and total mass transfer coefficient of adsorption column provides a basis for the design of size-enlarged plant.

The mass transfer coefficient is directly proportional to the cube root of feed velocity.

Adsorption model for TP mass transfer with XDA-1 resins was set up and the height of mass transfer zone and total mass transfer coefficient in different operation conditions were calculated.

The overall height of catalyst bed as well as the optimal feeding point was obtained for different detritiation efficiency under specific mass transfer coefficient of catalysts.

Membrane modules with high porosity possess a high mass transfer coefficient.