off position发音

意思翻译

断路位置

相似词语短语

position───v.安置；把……放在适当位置；n.位置；姿态；处境，地位；观点；职位，工作；站位

lotus position───n.（佛教）莲花坐（一种盘腿坐姿）

position absolute───绝对位置

funic position───funic位置

missionary position───n.传教士式体位，男上女下式体位；传教士式体位（指男上女下的性交姿势）

change position───交换位置

adjourned position───封棋局面

gesture position───手势姿势

upright position───正浮位置；直坐式；垂直位置[状态]

双语使用场景

There is no off position on the genius switch.───天才的开关上没有关闭这一位置。

off position does not imply an all-pole disconnection.───断开位置并不意味着全极断开。

Some DPDT switches have a central off position.───有些DPDT开关有一个中央关闭位置。

We were playing for a play-off position and I played nine straight games.───我们为附加赛席位而努力踢球，而我也踢了连续9场比赛。

both material shut-off valves, must be turned to their "off" position and all fluid pressure relieved before removing side block screws! !───在拆卸一边锁止螺钉前，两个物料切断阀必须调到“关闭”位置，并且释放所有液体压力！！

Note: When not in use when the instrument, Proposed to instrument the power button toggle to the off position to conserve battery power.───备注：不使用对刀器的时候，建议将对刀器电源按钮拨动到关的位置，以节约电池用电。

At this time, we ask that you please put away all electronic devices and place all cellular phones in the off position.───在这一刻，请您不要使用任何电器，并且关闭手机。

By analyzing the ray's out off position of the cylinder system, the shape and size of the slot are determined.───通过对光束出射位置的分析，确定了光线出射槽的位置和形状尺寸。

If Emergency Stop Switch is turned to Off position, all solenoids de-energize returning all valves to fail-safe condition.───如果紧急停车开关切换至关闭位置，所有的电磁阀都将失电，把所有阀门返回到故障安全状态。

英语使用场景

Some DPDT switches have a central off position.

If Emergency Stop Switch is turned to Off position, all solenoids de-energize returning all valves to fail-safe condition.

Power resume and the embroidery can at cut off position.

Turn the ignition switch to the OFF position to exit disable mode.

Some SPDT switches have a central off position and are described as'on - off - on '.

"Limited service controller "on-off"switch must be in the extreme "off"position to open the enclosure door. "

TURN IGNITION FROM THE OFF POSITION TO THE ON ( RUN ) POSITION.

Reaching to the control panel, he flipped the auto-pilot to the off position.

Ensure that the circuit - breaker is in the OFF position ( or off ).