magnetic flux density信息详情
磁感应强度；[电磁]磁通密度
flux density───[物]通量密度；[天]辐射流密度；[天]流量密度；通量密度，辐射流密度，流量密度
diffusive flux density───扩散通量密度
magnetic───adj.地磁的；有磁性的；有吸引力的
flux───n.（Flux）弗勒克斯（人名）；vt.使熔融；用焊剂处理；n.[流][机]流量；变迁；不稳定；流出；vi.熔化；流出
density───n.密度
magnetic train───磁力列车
solder flux───焊剂；热焊接溶剂
phonolite density───响岩密度
flux definition───通量定义
The magnetic flux density on the crack tip in a metal pipeline was studied by numerical simulation method.───用数值模拟方法研究了金属管道裂纹尖端磁通量密度的分布情况。
Fast cooling in heat treatment can decrease magnetic flux density.───快速冷却可降低钢的磁通密度。
The research showed that the control result of electromagnetic brake was related to casting speed, mould Angle and magnetic flux density.───研究表明，电磁制动的控制效果与浇铸速度、水口角度和磁通量密度有关。
The maximum magnetic flux density can be obtained by choosing both a stainless crucible and a graphite cooler.───同时选用不锈钢坩埚与石墨冷却器可以使环缝内铝合金熔体的磁感应强度获得最大；
The distribution of the magnetic flux density in the magnetic field generator which provided traveling magnetic field have been studied.───研究了移动磁场发生器的电磁特征及磁场空间分布规律；
the magnetic-flux density as well as the coil response current curve and the pitch point magnetic field strength curve are obtained.───得出了发射器的磁力线、磁通密度分布图以及线圈响应电流曲线和节点磁场强度曲线。
At the same current and frequency, the magnetic flux density increases as the stirring gap width decreases gradually.───相同电流和频率条件下，磁感应强度随着环缝宽度减小而逐渐增大；
It is a necessary to predict a magnetic flux density surrounding a current-carrying conductor in design of EMC and current sensor.───在电磁兼容和电流传感器设计方面，预先估计载流导体表面的磁通密度是必要的。
At the same frequency, magnetic flux density, electromagnetic force and velocity all increase with the current.───当频率相同时，磁感应强度、电磁力和流速随着电流的增加而增加。
At the same current and frequency, the magnetic flux density increases as the stirring gap width decreases gradually.
In center column of core , magnetic flux density is reduced by counteraction.
Using the proposed model, the relation between the magnetic flux density in the air of the giant magnetostrictive force sensor and the value of force applied on the magnetostrictive rod is calculated.
The magnetic flux density is uniform near the center of coil, therefore, the meniscus level in mold should locates between the coil center and the top of mold in casting operation.
Relationship between MRF' s yield stress and magnetic flux density, the shear stress and magnetic flux density and shears tress and shear rate were investigated.
At the same gap width, the magnetic flux density increases with an increase in stirring current, but decreases with the stirring frequency increasing.
Grain growth is favourable for increasing magnetic flux density.
It is a necessary to predict a magnetic flux density surrounding a current-carrying conductor in design of EMC and current sensor.
In calculating the magnetic flux density B between two blocks of parallel block capacitors, there are two common solutions,[http://sentencedict.com/magnetic flux density.html] one of which is not correct.