pin type信息详情

pin type发音

意思翻译

针式

相似词语短语

pin───n.大头针,别针,针;栓;琐碎物;引脚;vt.钉住;压住;将……用针别住

type───vi.打字;vt.打字;测定(血等)类型;n.类型,品种;模范;样式;n.(Type)人名;(英)泰普

dentine pin───牙本质钉

pin nailer───钉钉机

scarf pin───围巾夹针

oar pin───桨销

pin maudo───固定销

firing pin───[军]撞针;撞针; 击针

sear pin───[体]击发阻铁轴

双语使用场景

brief comparison of the dryer with the traditional one with the example of cap and pin type insulator body is presented.───以悬式绝缘子的干燥为例,将少空气快速干燥器干燥与传统形式干燥进行了简单对比。

Box section telescopic boom; Telescopic mechanism; Pinless boom; Single cylinder pin type;───箱型伸缩臂; 伸缩机构; 无销式; 单缸插销式;

The paper gives out structure of tilting pin type hydraulic forging die for producing frame of shaker.───给出了震动器机壳斜销式液锻模具设计结构。

The rollers of these bearings are axially through-bored and are guided by the pins of a so-called pin-type cage.───这些轴承的滚筒是轴向钻通的,通过所谓的插销式保持架的插销引导。

METHODS A kind of edge-type pulverizer was made to comminute Glycyrrhiza Uralensis Fisch. , compared with a traditional Pin-type pulverizer.───方法针对根茎类中药甘草的物性特点,设计了剪切力为主的实验机,并与现有销棒式粉碎机进行了粉碎实验结果的对比。

Insulators and fittings for overhead lines. Glass insulators of the cap and pin type. Characteristics. Dimensions.───架空线路用绝缘子和器材.帽型和杆型玻璃绝缘子.特性和尺寸

In general, the cages for SKF rolling bearings can be classified as pressed, solid or pin-type cages.───一般说来,用于SKF滚动轴承的保持架可以分为冲压、实体或支柱式保持架。

Bearing with large contact angle, intermediate ring between the outer rings, pierced rollers and steel pin-type cages (fig 15).───带有大接触角度、外圈之间的中隔圈、穿孔滚子和钢支柱式保持架的轴承(图15)。

Bearing with steep contact angle and intermediate ring , pierced rollers and pin- type steel cages .───带有大接触角以及中隔圈、穿孔滚子和钢支柱式保持架的轴承。

英语使用场景

This' paper mainly researches on the humidifying property of the centrifugal nozzle with firing pin type, high pressure and little aperture.

However, the related research is rarely reported on the humidifying property of the centrifugal nozzle with firing pin type, high pressure and little aperture.

The connection type between the vertical guide plate of the vertical adjusting mechanism and the positioning plate can adopt compression-fitting connection or dowel pin type connection.